706011

Russell Hobbs 15199 Manual

4
Zoom out
Zoom in
Previous page
1/12
Next page
4
POSITIONING
• Put the hob on a stable, level, heat resistant work surface, at least 75cm (30in) above oor
level, and leave a space of at least 5cm (2in) all round.
• Don’t use the hob near or under cupboards, curtains or combustible materials.
• Keep it away from the edge of the work surface, and route the cable so it doesn’t overhang
and can’t be tripped over or caught.
CONTROLS
1. Each hotplate has a control and a light. The controls are marked MIN (o) to MAX.
2. To switch a hotplate on, turn its control clockwise from MIN.
3. To switch a hotplate o, turn its control anti-clockwise to MIN.
4. Each light glows when its hotplate is heating, goes o when the set temperature is reached,
then cycles on and o as the thermostat operates to maintain the temperature.
PANS
• Use heavy-based, at-bottomed pans, for good contact with the hotplates.
• Sit the pans centrally on the hotplates.
• Position the handles safely out of the way, where they can’t be knocked.
• Use pans with bases the same size as the hotplates, to avoid overheating.
• Don’t use oversized pans (e.g. catering pans) or pans which cover both hotplates. They’ll
overheat the hob, and reduce its working life.
USING
1. Check that both controls are at MIN.
2. Plug the hob into the wall socket (switch the socket on, if it’s switchable).
3. Turn the control(s) to the required setting(s).
4. Use the lower settings (1-2) for simmering, medium (3-4) for rolling boil and the higher
settings (5-6) for boiling.
5. The hotplates will stay hot for quite a while after switching o. Use the residual heat to keep
food warm, or to dry o potatoes or rice.
6. Switch the hotplates o (MIN), wait till they’re cold, and unplug before moving or cleaning
the hob.
CARE AND MAINTENANCE
1. Switch the hotplates o (MIN), unplug the hob (switch the socket o rst, if it’s switchable),
and wait till the hotplates are cold.
2. Mop up any spillage after each use, don’t leave it to harden.
3. Wipe all surfaces with a damp cloth (and a little washing-up liquid if necessary).
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 15199 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 15199 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info