531514

Ruby Fires Lucius Manual

9
Zoom out
Zoom in
Previous page
1/48
Next page
8
Switching ame simulator on / off
Note: You can also switch on the ame simulator when you are not using the heating function.
Note: Power consumption of the electric replace insert with illumination switched on but without heating
function amounts to approx. 2 W.
• Open the right hand cover 2 by opening it up towards the front.
• Set the ON / OFF switch 9 to position I.
• Set the ON / OFF switch 9 to position 0 if you would like to turn off the ame simulator.
• Close the right hand cover 2 .
Using the dimmer function
Note: Your electric replace insert has a dimmer function. With it you can adjust the brightness of
the ame simulator.
Note: You can only use the dimmer function when the ame simulator is switched on (see “Switching
ame simulator on / off“).
• Open the left hand cover 6 by opening it up towards the front.
• Turn the dimmer 11 in the direction of rotation to increase the brightness of the ame simulator or as
the case may be turn the dimmer 11 in the direction of rotation to reduce the brightness of the ame
simulator.
Switching heating function on / off
Note: The electric replace insert has 2 heating stages with different heat intensities.
• Open the right hand cover 2 by opening it up towards the front.
• Set the switch for the rst heating stage 8 to position I if you would like a low supply of heat. Set the
switches for the rst 8 and second heating stages 7 to positions I and II if you would like a high
supply of heat.
Note: You can only put the second heating stage into operation if the switch for the rst heating stage
8 is set to position I.
ATTENTION! DANGER OF BURNING! Please observe that the surfaces which radiate heat can
achieve temperatures exceeding 50 °C. Make sure that the unit is switched off and cooled off before
you touch it.
ATTENTION! Please make sure that the unit is not covered with towels, curtains or similar objects.
Otherwise there is danger of overheating. Therefore, always pay attention that the ventilation
slots 1 are kept clear.
• Flip the switches for the rst heating stage 8 and the second heating stage 7 up in order to turn of
the heating function.
37990 manual.indd 8 28-07-2010 12:29:57
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ruby Fires Lucius at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ruby Fires Lucius in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info