763138
10
Zoom out
Zoom in
Previous page
1/12
Next page
EN
The appliance is in a normal operating position (in an upright position on its feet).
This appliance must not be used in a damp room.
The rubber feet on this product may interact with wood and cause damage to furniture. Do not place on
ne wood furniture.
VOLTAGE
Before using for the rst time, check that the voltage of your mains supply is the same as that shown on
theappliance and that your mains supply is suitable for the power indicated on the appliance.
ASSEMBLING
Your appliance is supplied unassembled.
It is essential to assemble it correctly. To reduce the risk of re, electric shock, and injury to persons, this fan
must be installed according to this instruction.
You must set and use your appliance in compliance with the standards in force in your country.
USER SERVICING INSTRUCTIONS
Fused plug
This plug is a safety feature. It contains a safety device (fuse) that should not be removed. Discard product if the
attachment plug is damaged.
To reduce the risk of re, electric shock and personal injury, do not remove, replace, repair or tamper with the
originally supplied plug.
If the fan does not function properly, it may be due to the safety device incorporated in this plug.
If the fuse fails, it is generally due to a short circuit or circuit overload. Replace the fuse as per the instructions
below.
If the replacement fuse fails, immediately unplug the unit and contact Rowenta consumer services for assistance.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this
plug is intended to t in a polarized outlet only one way. If the plug does not t fully in the outlet, reverse the plug.
If it still does not t, contact a qualied electrician. Do not attempt to defeat this safety feature.
Fuse replacement :
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. (A)
2. Open the fuse (B) by sliding the fuse cover on the top of the plug towards the blades.
3. Remove fuse (C) carefully by gently prying out the ends of the fuse from the receptacle.
Warning! Only replace with a fuse type and rating matching what was removed from the product.
4. Risk of re. Replace the fuse only with 2.5 Amp, 125 Volt fuse. Gently install replacement fuse back into the
pins that will hold it in place. (D)
Note : If the fuse is not seated properly, the unit will not function.
5. Close fuse cover (E) by sliding the fuse cover back over the fuse box in the plug until it is completely closed.
6. Plug the fan back in and resume use.
APPLIANCE(S) WITH REMOTE CONTROL VU2410U7/ VU2410U8 and VU2410:
VU2410U7/ VU2410U8 and VU2410 : Remote control : the battery 3V button cell (CR2032) is included.
WARNING: Chemical Burn Hazard. Keep batteries away from children.
ABCDE
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta VU2410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta VU2410 in the language / languages: English, French as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info