483580

Rowenta DZ 9020 Manual

11
Zoom out
Zoom in
Previous page
1/12
Next page
9
Clean position (fig.5) : steam will now begin to build up. After a few
seconds water will merge from the soleplate, rinsing dirt and scale
particles out of the steam chamber. Move the steam control to
position after approx. 1 minute. Plug in the iron and allow the
iron to heat up again. Wait until the remaining water has evaporated.
Unplug from the mains and allow the iron to fully cool down.
When cool, the soleplate can be wiped with a damp cloth.
18 • Cleaning the iron
When the appliance has cooled down, wipe it down with a damp
cloth or sponge, as required. Remove the dirt from the soleplate
with a damp cloth or sponge.
TIP Use the Self Clean function approx. every 2 weeks.
If the water is very hard, clean the iron weekly.
IMPORTANT Do not use sharp or abrasive cleaning agents or
objects to clean soleplate and other parts of the iron.
If the appliance has been standing unused for long periods,
use the Self Clean function (see § 17).
Problems Cause Solution
The iron is
plugged in, but
the soleplate of
the iron
remains cold.
No mains supply. Check that the mains plug is properly
inserted or try plugging the iron into
a different socket.
Temperature control
set too low.
Set the temperature control to a
higher temperature.
The automatic
electronic cut-out*
is active.
Move your iron.
Thermostat
control light*
or the yellow
led* goes on
and off.
This is normal. When the thermostat control light*
or the yellow led* goes on and off
the iron is heating up. As soon as the
thermostat control light* goes off or
the green led* lights up the set
temperature has been reached.
Yellow and red
LED are
blinking
alternately.
The electronic has
an internal failure.
Contact an official Rowenta
Customer service.
PROBLEMS?
e.
f
n.
* depending on model
DZ9000-11038999469 2/03/06 14:29 Page 9
… 11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rowenta DZ 9020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rowenta DZ 9020 in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info