485824

Rotho TWIN TT AQUAFILTER Manual

37
Zoom out
Zoom in
Previous page
1/39
Next page
36 ROBERT THOMAS, L.P. ©2008
Suction strength is too low
Insufficient suction strength can have multiple causes. To resolve this issue, do the following:
• Make sure the casing cover is fully closed.
• If the suction strength LED indicator is green, the vacuum is only set to minimum suction
strength. Press and hold the One-Touch power button until the LED turns yellow and the vac-
uum switches to maximum suction strength.
• Check the supplementary air switch on the suction hose handle. If the switch is open, close it.
• Check all nozzles and surfaces for filth and deposits. Clean them if necessary.
• Clean the AQUAFILTER assembly and replace the water in the recovery tank. See Clean the
TWIN TT on page 22 for instructions.
• Clean the HEPAfilter. See Cleaning the HEPA Filter on page 33 for instructions.
Excessive water drops form on the inside of the casing cover
Some droplets on the inside cover are to be expected. However, if the number of water droplets be-
comes excessive, the AQUAFILTER is full. Clean the AQUAFILTER assembly and replace the water
in the recovery tank. See Clean the TWIN TT on page 32 for instructions.
Dirty water comes out of the top of the TWIN TT base
When dirty water seeps out of the air outtake on the top of the TWIN TT base, the AQUAFILTER is
full. Turn off the vacuum cleaner and clean up the dirty water. Then, clean the AQUAFILTER assem-
bly and replace the water in the recovery tank. See Clean the TWIN TT on page 32 for instructions.
Suction strength suddenly decreases
First, make sure the TWIN TT is not slanted or upright. The TWIN TT base must be level and horizon-
tal during operation. Then, check the recovery tank and empty it if necessary.
Water is leaking out of the spray nozzle
Make sure the filter system is clean and set up properly. See Clean the TWIN TT on page 32 for in-
structions. In particular, clean the floater in the recovery tank. Make sure the floater hinge is working
properly and check to see that the floater still floats closed when the recovery tank is full.
Large amounts of water gather in the suction area
Check all nozzles and surfaces for filth and deposits. Clean them if necessary. Then, make sure the
AQUAFILTER, micro-filter, and/or anti-splash grid are clean and properly installed. See Clean the
TWIN TT on page 32 for instructions.
… 37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotho TWIN TT AQUAFILTER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotho TWIN TT AQUAFILTER in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info