Manual Rotel RT12 (page 16 of 20) (English)

489959

Zoom out

Zoom in

1/20

RT-12 DIGITAL GATEWAY

NETWORK SETTINGS

Network Conﬁg

This section covers the setup procedue for wired or wireless LAN in

more detail.

Push the Network 6N button to enter the main menu as shown

below.

< Internet Radio >

My Stuff

Media Player

Settings

Note: If you are unable to return to the above menu automatically after

entering Network mode, push the BACK 0D button to get to the

above menu.

Scan for Networks

From the main menu, select the Settings option then select Network Conﬁg.

Then select Scan for Networks option.(only available in wireless setup)

. Once the network is found, the display will show the network ID. Turn

the knob to select, push to conﬁrm.

< Scan for networks >

Enter network name

View Conﬁg

Edit Conﬁg

Enter network name ( only for wireless connection)

If the unit can not ﬁnd any networks, the network ESSID can be entered

manually .

Use the knob to keep selecting letters of the device name by turning and

pressing, and select “END” word to conﬁrm the name

Network Name

< END <> A BCDEFGHIJK >

NAME1

View Conﬁg

Show current network conﬁguration details. Turn the knob to see next/

previous page of “Mode”-->”ESSID”-->”MAC Address”--> “IP Address”

-->”Netmask”-->”Gateway”-->”DNS Servers”. Display as below:

< Mode >

Auto DHCP

< ESSID >

XXXXXX

Edit Conﬁg

This menu can be used to edit the current network conﬁguration. This

menu is useful for entering a static IP address. Select this function with

the knob and enter the static IP address, MAC address, DNS of the

selected network.

To enter the value, press knob, then rotate the knob to adjust the value up

or down. Press again to enter the value and move on to the next ﬁeld.

Continue until all information has been entered.

Signal Warning ( only for wireless connection)

Select YES or NO to enable or disable warning of low Wi-Fi signal.

Wired/Wireless

Select Auto (defaults to wired if both are connected), Wired only, or

Wireless only.

Version

This menu displays software and hardware information of the unit.

Upgrade Firmware

Use this option to download new ﬁrmware for the internet radio. If new

ﬁrmware is available, there will be a prompt to download.

Note: At this stage, you can press the BACK button to cancel the

firmware upgrade. A firmware upgrade may take several minutes,

do not switch off the power to the unit or put it into standby until the

operation is complete, otherwise, the unit may become permanently

damaged. Upgrading can take 15 to 60 mins, depending on the

speed of your internet connection.

This will display a key that can be used to register the unit on the Rotel

Radio Customer portal: www.rotelradio.com

Set Time/Date

Set you local time and date. Push knob to start entering value, rotate

knob to change value. Press again to conﬁrm value entered and move

on to the next ﬁeld.

UPnP

Use this setting to set any UPnP device name. This is the name that your

music server will pickup in Media Player mode. Use the knob to keep

selecting letters of the device name by turning and pressing, and select

“END” word to conﬁrm the name, or simply press the REPLY key.

DEVICE NAME

< END <> A BCDEFGHIJ >

DEVICE

WiFi Strength

Shows a percentage to indicate the WiFi strength.

Conﬁgure “My Stuff”

A personalized menu “My Stuff” can be setup in the top level menu.

Open the website, http://rotelradio.com, from your internet browser.

Please enter the registration key, this can be found in ‘Settings > Register’

menu. Enter this registration key into the website and follow the instructions

to setup an user name and password. Remember the user name and

password, you will need this to access the site.

Hi, sontec electronics have just fitted me a new streaming module into my rotel RT12 and I need to know how to get internet radio, put in my wifi key and conected to my router but just get the message pura vida 106.3fm Buffering 0% please help Submitted on 10-10-2022 at 21:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rotel RT12 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rotel RT12 Manual

Product: