577720
10
Zoom out
Zoom in
Previous page
1/12
Next page
10
RDD-1580 Digital to Analog Converter
Fuse Replacement
If another electrical device works when plugged into the power outlet, but the
Power Indicator of the unit does not light when plugged into the same outlet
and the Power Switch is pushed in, it indicates that the internal power fuse
may have blown. If you believe this has happened, contact your authorized
Rotel dealer to get the fuse replaced.
No Sound
If the unit is getting power, but is producing no sound, check the INPUT
INDICATORS on the front panel. Make sure the selected source is connected.
Also check to make sure the analog outputs of the unit is properly connected.
Can not play 24 bit 192kHz source
96kHz and 192kHz playbacks are only available through the rear digital
inputs. Please also note that many media players are not capable of decoding
24bit 192kHz audio files. Please make sure your player can decode 24bit
192kHz files. Also, confirm the RDD-1580 PC-USB input is configured to
USB 2.0 Audio and the Windows audio driver is installed on your computer.
(See PC-USB Input in the manual for more details)
NOTE: MAC computers do not need a driver but require software that
supports 24bit 192kHz playback but still require the RDD-1580 PC-USB
input to be conferred to USB 2.0 Audio.
Playable Audio Format
your authorized Rotel dealer for information on these external repeaters and
the proper wiring of a jack to fit the mini-jack receptacle.
12 Volt Trigger Input
0
The RDD-1580 can be activated by a 12 volt trigger signal. The trigger
input accepts any control signal (AC or DC) ranging from 3 volts to 30 volts.
When a cable is connected to the 12V input and a trigger signal is present,
the RDD-1580 is activated. When the trigger signal is turned off, the unit
goes into standby mode. The front panel power indicator remains illuminated,
but the unit will not operate.
NOTE: When using the 12V Trigger feature, leave the POWER button in
the ON position.
Audio Controls
Source Input 4B
The Source Input selects the input signal source. From the front panel or
remote press the corresponding input key to select the source to listen to.
Repeat F
Some audio source devices support the use of the repeat function including
Repeat Track, Repeat Album, Repeat Off. Press the Repeat key F on the IR
remote control to toggle these functions. The USB source LED 4 will blink
as follows to indicate the currently activated Repeat function.
Repeat Off: One time blink [Factory Default]
Rpeat Album: Two times blink
Repeat Track: Three times blink
Random E
Some audio source devices support Random playback of music. Press the
Random key E on the IR remote control to toggle the Random function.
The USB audio source LED will blink as follows to indicated the currently
activated function
Random Off: One time blink [Factory Default]
Random On: Two times blink
Factory Default
The RDD-1580 can be reset to restore the factory Default settings. To restore
factory defaults press and hold the front USB source input key 4 for 5
seconds until all Source LEDs are blinking. Release the USB source input
key and the RDD-1580 will restore factory settings and restart.
Troubleshooting
Most difficulties in audio systems are the result of incorrect connections,
or improper control settings. If you encounter problems, isolate the area
of the difficulty, check the control settings, determine the cause of the fault
and make the necessary changes. If you are unable to get sound from the
amplifier, refer to the suggestions for the following conditions:
Power Indicator Is Not Illuminated
No main power to the unit. Check the front panel power switch. Make sure
that it is set to the ON position. Check AC power connections at the unit
and the AC outlet.
U
USB Apple (iPhone, iPod, iPad)
Format Notes
Apple Lossless
MP3
AAC
AIFF
Any supported file loaded to Apple device.
Phone may resample depending on stored
format. May exclude Apps designed to play
flldbhd
AIFF
WAV
USB Bluetooth
Format Notes
formats not originally supported by the sending
device.
USB Flash Drive
F t
N t
May exclude Apps designed to play formats not
originally supported by the sending device.
Any format supported
by the sending device.
F
ormat
N
otes
MP3
WMA
WAV
OGG Vorbis
M4A/AAC
48K 16 Bit Maximum
PC-USB
Format Notes
Format determined by
the Media Player/
Any supported format by the PC software
44 1K 48k 88 2K 96K 176 4K 192K
Coax/Optical
Format Notes
Server software that
you use.
44
.
1K
,
48k
,
88
.
2K
,
96K
,
176
.
4K
,
192K
16 bit, 24 bit
SPDIF LPCM
44.1K, 48k, 88.2K, 96K, 176.4K, 192K
16 bit, 24 bit
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotel RDD-1580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotel RDD-1580 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info