489961
12
Zoom out
Zoom in
Previous page
1/13
Next page
12
RA-12, RA-11 Stereo Integrated Amplifier
Specifications
Continuous Power Output 40 watts/ch (RA-11)
(20-20 kHz, < 0.03%, 8 ohms) 60 watts/ch (RA-12)
Total Harmonic Distortion (20Hz-20kHz) < 0.03% at rated power,
1/2 power or 1 watt
Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.03% at rated power,
1/2 power or 1 watt
Frequency Response
Phone input 20Hz-15kHz, ±0.3dB
Line Level Inputs 10Hz-100kHz, ±1dB
Damping Factor (20-20,000 Hz, 8 ohms) 180
Input Sensitivity / Impedance
Phone input 2.5mV / 47 kOhms
Line Level Inputs 150 mV / 24 kOhms
Input Overload
Phone input 180mV
Line Level Inputs 5V
Premp Output / Impedance 1V / 470 Ohms
Tone Controls - Bass / Treble ±10 dB at 100Hz / 10kHz
Signal to Noise Ratio (IHF “A” weighted)
Phone input 80 dB
Line Level Inputs 100 dB
Digital Section
Frequency Response 10Hz-95kHz ±3.0dB(MAX)
Signal to Noise Ratio (IHF ”A” weighted) 100dB
Input Sensitivity/Impedance: 0 dBfs/75 ohms
Preout/Impedance: 1.2V/470 ohms (at -20dB)
Decodable front USB/iPod Digital Signals: AAC(m4a), WAV, MP3,
WMA (up to 48K 16 bit)
Coaxial/Optical PCM up to 192K 24 bit
Power Requirements 120V, 60 Hz (USA)
230V, 50 Hz (Europe)
Standby Power Consumption 0.5W
RA-11 Power Consumption 220 Watts
RA-11 Dimensions (W, H, D) 17” x 2
7
/8” x 13
1
/2
430 x 72 x 342 mm
RA-11 Panel Height 60 mm / 2
3
/8”.
RA-11 Weight (net) 6.39 kg, 14lbs.
RA-12 Power Consumption 300 Watts
RA-12 Dimensions (W, H, D) 17” x 3
5
/8” x 13
1
/2
430 x 92 x 342 mm
RA-12 Panel Height 80 mm / 3
1
/16”.
RA-12 Weight (net) 8.02 kg, 18lbs.
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel HiFi logo are registered trademarks of The Rotel
Co., Ltd. Tokyo, Japan.
Troubleshooting
Most difficulties in audio systems are the result of incorrect connections,
or improper control settings. If you encounter problems, isolate the area
of the difficulty, check the control settings, determine the cause of the fault
and make the necessary changes. If you are unable to get sound from
the unit, refer to the suggestions for the following conditions:
Power Indicator Is Not Lit
The Power Indicator and the basic items in the Display window should be
lit whenever the unit is plugged into the wall power outlet and the Power
button is pushed in. If it does not light, test the power outlet with another
electrical device, such as a lamp. Be sure the power outlet being used
is not controlled by a switch that has been turned off.
Fuse Replacement
If another electrical device works when plugged into the power outlet,
but the Power Indicator of the unit does not light when plugged into the
same outlet and the Power Switch is pushed in, it indicates that the internal
power fuse may have blown. If you believe this has happened, contact
your authorized Rotel dealer to get the fuse replaced.
NO SOUND
Check the signal source to see if it is functioning properly. Make sure
the cables from the signal source to the amplifier inputs are connected
properly. Be sure the Listening Selector is set to the proper input. Check
the wiring between the amplifier and the speakers.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rotel RA11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rotel RA11 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info