Manual Rossmax WF262 (page 1 of 2) (English)

783668

Zoom out

Zoom in

1/2

www.rossmax.com

Model: WF262

OBM_IB_WF262_

EN_SW_ver2010

INSWF262000000010

Warranty Card

This instrument is covered by a 2 year guarantee from the

date of purchase, batteries and accessories are not included.

The guarantee is valid only on presentation of the warranty

card completed or stamped by the seller/dealer confirm-

ing date of purchase or the receipt. Opening or altering the

instrument invalidates the guarantee. The guarantee does

not cover damage, accidents or non-compliance with the

instruction manual. Please contact your local seller/dealer or

buying source or www.rossmax.com.

Customer Name: ________________________________

Address: _______________________________________

Telephone: ______________________________________

E-mail address: __________________________________

Product Information

Date of purchase: _______________________________

Store where purchased:

________________________________________________

Manufacturer: Rossmax Swiss GmbH,

Widnauerstrasse 1, CH-9435 Heerbrugg, Switzerland

www.rossmax.com

Pairing the device with your Smartphone for rst time use.

Please visit the website at www.rossmax.com for the initial

set-up instructions.

1. Download and install the applicable APP onto your

smartphone.

2. Set up your personal data on the APP.

3. Turn Bluetooth and the APP of smartphone on, and fol-

low the setup and pairing instructions.

4. The Bluetooth symbol ( ) will illuminate on the display

that indicates the pairing is done.

• If the pairing is successful, once the measurement is

done, the current measured reading will automatically

be transferred to the APP and your measured values will

also be shown on the APP at the same time.

• If the pairing has failed, the symbol will be shown on

the display, and the current measured values will not au-

tomatically be transferred to the APP. Please re-pair this

device with your smartphone.

• Clean the scale only by using a slightly damp cloth.

• Do not use solvents or abrasive cleaning agents.

• Do not submerge the scale under water.

• Store the scale in a dry location and keep it horizontal.

• Do not expose the scale to direct sunlight.

• Place the unit gently and avoid strong shocks, such as

dropping the unit on the oor.

Capacity x Graduation 5-150kg x 100g

Accuracy 50kg ± 0.4kg; 100kg ± 0.5kg;

150kg ± 0.6kg

Display resolution Body fat/Body muscle: 0.1%

Body fat 5-80% ±2

Body muscle 25-90% ±2

Measurement unit Kg/lb/

Dimensions Approx. 300 x 270 x 22mm

Batteries AAA*3

Auto-on value 5-15Kg

Operation condition 5-40°C, ≤85%RH, 80 - 106kPa

Storage condition -20-55°C, ≤90%RH, 50 - 106kPa

Error

messages Possible causes Correction

No display

appears

Battery at or no

battery.

Replace the batteries

with the intended type

(3 x AAA).

Battery is not in-

stalled or inserted

properly.

Re-insert the batteries

in the correct positions.

The weight is

less than auto-on

value.

Step on the scale or

press it hard to meet

auto-on value (5-15kg).

Low battery.

Replace the batteries

with the intended type

(3 x AAA).

The weight value

is above the meas-

urement range.

The maximum meas-

urement capacity is

150 kg. Please remove

the critical load to

avoid load cell damage.

Measurement

error.

Please follow the meas-

urement steps and try

again.

Data transmit

failure.

Connect this device

with your smartphone

and transfer again.

Data Transfer via Bluetooth

Care and Maintenance

Technical Data

Error Messages and Troubleshooting

Data Transfer via Bluetooth

Please download and install

the free Healthstyle APP onto

your smartphone

Healthstyle APP

APP

45 kg

APP

45 kg

Bluetooth Body Fat Scale

Step 4

The measured reading (weight) will blink twice and

lock on LCD display. Check your measured values

(body weight, body fat in %, muscle in %, visceral fat

level, BMR and BMI) from the APP.

Note:

1. Before 0.0 kg appears, please don’t step on the monitor.

Without further activity the monitor will automatically

power-o in 15 seconds.

2. Unpairing your device will not delete the data from the

APP.

3. If you re-pair your smartphone with the device, all prior

reading history stored on the phone APP will be re-

tained.

4. Bluetooth data transfer will reduce the battery capacity.

5. Electromagnetic interference: Avoid strong electrical or

electromagnetic elds in the direct vicinity of the de-

vice.

1. The unit switch button is located at the bottom of the

scale.

2. Press the unit switch button to select your desired unit

from “kg” (kilo gram) to “lb” (pound) or to “公斤” (kilo

gram) when the monitor displays “0.0”.

Unit Switch

Step 1

Firm and

at oor

Put the scale on the rm and

at oor, avoid cushioned oor

surface such as a carpet or mat.

Please refer to “Data Transfer via

Bluetooth” section for rst time

use.

Step 2

Turn the APP of smartphone on,

step on the scale gently, it will

turn on automatically. The LCD

display will show 0.0 kg(lb) and

Bluetooth symbol. The Bluetooth

symbol ( ) will illuminate on

the display after successful

connection with smartphone,

if not, will illuminate,

the subsequent measured

readings (max. 10 readings)

will be temporarily stored in

the device and transmitted to

APP automatically until next

successful connection.

Step 3

Step onto measurement

platform carefully with bare feet

on the electrodes (stainless steel

area) of the monitor and remain

stationary until the measured

reading stop ashing after

completion of the measurement.

How to Take a Measurement

WARNING: The symbol on this product means that it's an elec-

tronic product and following the European directive 2012/19/EU

the electronic products have to be disposed on your local recy-

cling centre for safe treatment.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rossmax WF262 in the language / languages: English as an attachment in your email.

The manual is 1.1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rossmax WF262 Manual

Product: