714314

Rommelsbacher VAC300 Manual

30
Zoom out
Zoom in
Previous page
1/32
Next page
30
Bag loses its vacuum after sealing
Wrinkles, crumbs, grease or humidity can cause leaky spots at the sealing seam. Reopen the bag, clean the upper
part of the bag inside as well as the sealing bar. Then seal again. In case of very moist food it is recommended to
place a second sealing seam above the first one.
Check the bag for damage or holes. Padding out sharp edges of the contents using kitchen paper is recommended.
Appliance does not create a complete vacuum inside an “Executive” container or with an
universal lid
Check if one end of the connection hose is positioned into the hose port of the appliance and the other end into the
knob of the container’s lid.
Do not fill the container completely but leave a space above of at least 3 cm.
Remember that liquids must be allowed to cool (in the fridge to be sure) before being vacuum-sealed.
Check if the upper rim of the container or jar as well as the seal of the universal lid is undamaged and clean. Clean
the rim and the lid with a tepid moist cloth and start the vacuum sealing process again.
Ensure that the seals of the lids on the container or universal lids fit correctly and are undamaged.
“Executive” containers or universal lids lose their vacuum
Check whether the arrow on the knob of the lid of the container and universal lid were turned to “CLOSED” after
the vacuum sealing process.
Check whether the rim of the container/jar and the seal of the universal lid are undamaged and clean. Clean them
with a moist cloth and start anew vacuum sealing.
Check the right fitting and intactness of all seals in the lids of containers and universal lids.
Make sure that the ring below the knob of the lid of the container/universal lid fits exactly.
Check to see if the arrow on the knob of the lid of the container is turned to “CLOSED” after the vacuuming
process.
Look to see if the ring under the knob of the lid of the container or universal lid is positioned correctly and fits
exactly.
“Family” containers lose their vacuum
Check whether the rim of the container in the wear area is faulty.
See if the seals in the lid of the container fit correctly and are undamaged.
Check if the seal below the “PUSH” knob of the lid of the container is correctly positioned and fits exactly.
Lids, preserving jars and sealings must not show cracks.
Check to see if the seal below the middle knob of the lid of the container is correctly positioned and fits exactly.
Disposal
According to the Waste Electrical and Electronic Equipment Directive, this product must not be disposed of
with your normal domestic waste at the end of its life-span. Therefore, please deliver it at no charge to your
appropriately licensed local collecting facilities (e.g. recycling yard) concerned with the recycling of electrical
and electronic equipment. Please approach your local authorities for how to dispose of the product.
… 30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher VAC300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher VAC300 in the language / languages: English, German as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info