714312
31
Zoom out
Zoom in
Previous page
1/32
Next page
31
Troubleshooting
The appliance does not work
Check whether cord or plug show any damage. If yes – do not operate the appliance.
Check if the plug is correctly inserted in the socket. Check the socket by plugging in another appliance.
In case of overheating, the appliance switches off automatically. In this case let it cool down for 20 minutes
and then try again.
Check if the upper part of the appliance has correctly (audibly) engaged at both sides.
Appliance does not create a complete vacuum inside the bag
For a correct sealing process, the open end of the bag must completely extend into the vacuum chamber.
Check the sealing bar, the rubber lip as well as the sealing for dirt. Clean them and put them back into the
correct position.
Check if the upper part has correctly (audibly) engaged at both sides.
Check the bag for holes.
Appliance does not seal the bag correctly
Check if the upper part has correctly (audibly) engaged at both sides.
If the sealing bar gets too hot and the bag is melting, fold the upper part of the casing upwards and let the
sealing bar cool down for a few minutes.
This appliance is produced in compliance with current safety standards. In case of overheating, the appliance
switches off automatically. Let cool down for 20 minutes and try again.
Bag loses the vacuum after sealing
Wrinkles, crumbs, grease or humidity can cause leaky spots at the sealing seam. Re-open the bag, clean the
inside of the upper part of the bag as well as the sealing bar and seal again.
Check the bag for damage (crack, holes). Padding out sharp edges of the contents using kitchen paper is
recommended.
When pressing a button, all pilot lamps in the status display light up
The upper part of the appliance has not been locked correctly. For locking the upper part of the appliance
fold the handle to the lower position. As soon as the appliance is correctly locked, the first lamp of the status
display lights up and the appliance is ready for operation.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rommelsbacher VAC285 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rommelsbacher VAC285 in the language / languages: English, German as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info