652701
10
Zoom out
Zoom in
Previous page
1/12
Next page
10
Bedienungsanleitung
F Feststellschrauben A und B
1. Ziehen Sie die Schraube A am Boden
der Montageplatte (1) mit dem 3 mm
Inbusschlüssel (12) fest, um einen
Kugelkopf zu montieren.
2. Ziehen Sie die Schraube B auf der
Oberseite der Montageplatte (1) mit
dem 3 mm Sechskantschraubendreher
(12) fest, um die Montageplatte an der
Mittelsäule zu befestigen.
[1] Schraube B [2] Schraube A
G MONOPOD
1. Drehen Sie das Stativbein im Uhr-
zeigersinn und ziehen es aus der
Stativschulter.
2. Entfernen Sie die Mittelsäule (6) und
den Haken (7).
3. Schrauben Sie die Mittelsäule auf.
H Umrüstung auf Spikes (11)
Lösen [1] Festziehen [2]
Allgemeine Informationen:
Temperaturbereich: -40 °C bis + 100 °C
Das Stativ ist beständig gegen
Salzwasser.
Falls erforderlich, verwenden Sie bitte
ein weiches Handtuch mit einem sanften
Reinigungsmittel, um das Verriegelungs-
systeme und die beweglichen Teile zu
reinigen.
Wenn erforderlich, verwenden Sie für die
leichte Beweglichkeit bitte ein herkömm-
liches Schmiermittel oder Wachsöl.
User manual
F Screw A and screw B
1. Tighten screw A at bottom of the
mounting plate (1) with 3mm hex screw
driver (12) to fix the ball head.
2. Tighten screw B on top of the mounting
plate (1) with 3mm hex screw driver
(12) to fix the mounting plate on the
center column. [1] screw B [2] screw A
G Monopod
1. Turn tripod leg clockwise and take it off.
2. Remove central column (6) and take
away the hook (7).
3. Screw central column to the single leg.
H Change rubber foot to spikes (11)
[1] loose [2] tight
Announcements
General information:
Temperature range: -40 °C to +100 °C
The tripod can be use in sea water
If necessary, please use the soft towel
with moderate detergent to clean the
locking system and the gliding parts.
If necessary, please use regular lubricants
or wax oil.
Manuel d‘utilisation
F Vis A et vis B
1. Serrer la vis A à la base de la plaque
de montage (1) à l‘aide du tournevis
hexagonal (12) pour fixer la rotule.
2. Serrer la vis B au sommet de la plaque
de montage (1) à l‘aide du tournevis
hexagonal (12) pour fixer la plaque de
montage sur la colonne centrale.
[1] vis B [2] vis A
G Monopode
1. Tourner le trépied dans le sens horaire
et le retirer.
2. Retirer la colonne centrale (6) et enlever
le crochet (7).
3. Visser la colonne centrale sur le mono-
pode.
H Remplacer le pied en caoutchouc
par des pics (11)
[1] desserré [2] serré
Annonces
Informations d‘ordre général
Plage de température :
– 40 °C à + 100 °C
Ce trépied s‘utilise dans de l‘eau de mer
Si nécessaire, utiliser la serviette mol-
letonnée avec un détergent doux pour
nettoyer le système de verrouillage et les
parties coulissantes.
Si nécessaire, utiliser des lubrifiants
usuels ou de l‘huile de cire.
F G
1 2
Bedienungsanleitung | User man ual
Manuel d‘utilisation | Instrucciones de uso | Istruzioni di utilizzo | Manual de utilização
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei Rock Solid Carbon Tripod Gamma at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei Rock Solid Carbon Tripod Gamma in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info