104213

Rollei DR5 Manual

46
Zoom out
Zoom in
Previous page
1/47
Next page
46
Measure 2
For Windows 98/98SE/Me, the COM Port setting may be wrong.
Follow the steps below.
1. Connect your camera via the USB cable to your computer.
2. Click the [Start] button on the Windows taskbar to display the [Start] menu.
3. On the [Start] menu, point to [Settings], and then click [Control Panel].
4. On the Control Panel displayed, double-click the [System] icon.
5. On the [System Properties] screen displayed, double-click the [Device Manager] tab.
6. On the [Device Manager] tab page displayed, click [+] on the left side of [Port COM/LPT]
to open.
7. Click [DSC Camera Port] under [Port COM/LPT], and then click the [Properties] button at
the bottom of the [Device Manager] tab.
8. On the [DSC Camera Port Properties] screen displayed, Click the [Port Select] tab.
9. On the [Port Select] tab page displayed, select a COM Number not being used from [Port-Name].
The port (COM number) currently allocated for your camera is indicated by a "*".
Immediately after installing the USB driver, COM 7 should be selected, so select a
number above COM8.
10.Click [OK] to close the [DSC Camera Port Properties] screen.
11.Click [OK] to close the [System Properties] screen.
12.Click the [x] (Close) button to close the Control Panel.
Measure 3
Your camera may not be recognized correctly if you connect to the USB Port of your computer
via a USB hub.
Follow the steps below to change the USB port.
• Connect your camera directly to the USB port of your computer.
• If there are several root ports, change to another one.
If you are using a port other than USB, connect via a USB port.
Measure 4
The batteries may have worn out.
Check whether the batteries have worn out. If worn out, replace them with new ones.
Measure 5
The free space on the hard disk in your computer may be insufficient.
Check whether the hard disk has a space for running Windows, and the drive where you are
loading image files has the same capacity or more as that of the memory card inserted in the
camera.
… 46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rollei DR5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rollei DR5 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info