710422
2
Zoom out
Zoom in
Previous page
1/2
Next page
Features
Function Switch
You can select the function appropriate for the application
you have in mind for the pedal.
Use the function switch on the side of the pedal to select
the function you want to use.
Half Damper Control (Continuous)
This allows you to perform using the half damper function.
Switch Control (Switch)
The pedal functions as a pedal switch.
Rubber Plate
By holding the pedal rmly in place and preventing it from
sliding around, this plate makes it easier to depress the
pedal reliably and eectively.
Descriptions
Pedal Cord
Rubber Plate
Function Switch
* For information about the eects produced when you
operate the pedal, please refer to the documentation
for the connected device.
Connecting the Pedal
1. Connect the pedal’s cord to the Damper
pedal jack (or other Pedal jack) of the
device to which the pedal is being
connected.
Damper pedal jack of the device
* Note that connecting to any connector other than
those specied above may result in damage to the
unit.
2. Set the DP-10’s function switch to
Continuous.
Half Damper Control
Switch Control
* With instruments that do not support the use of the
half damper function, the pedal may not function as
hoped for. Should this be the case, move the DP-10’s
function switch to the “Switch position.
3. Rotate the rubber plate 180 degrees
clockwise to install it on the oor.
Main Specications
Pedal cord 2.2 m, 7 ft. 2 inches
Function switch Continuous, Switch
Dimensions 68 (W) x 220 (D) x 64 (H) mm
2-11/16 (W) x 8-11/16 (D) x 2-9/16
(H) inches
When using
the rubber
plate
68 (W) x 402 (D) x 64 (H) mm
2-11/16 (W) x 15-7/8 (D) x 2-9/16
(H) inches
Weight 700 g
1 lb 9 oz
Before using this unit, carefully read “USING THE UNIT
SAFELY” and “IMPORTANT NOTES. After reading, keep
the document(s) where it will be available for immediate
reference.
Copyright © 2004 ROLAND CORPORATION
5 This document explains the specications of the
product at the time that the document was issued. For
the latest information, refer to the Roland website.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DP-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DP-10 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DP-10

Roland DP-10 User Manual - German - 2 pages

Roland DP-10 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info