527421
7
Zoom out
Zoom in
Previous page
1/229
Next page
7
Richtlijnen voor het gebruik van microfoons
Als u een CD-R/RW in het CD-R/RW-
station plaatst…
Zet de CD-R/RW bij het plaatsen in het CD-R/RW-station
op de juiste positie vast, zoals aangegeven in "Een CD-R/RW
plaatsen". Plaats de CD-R/RW correct in de schijflade. Zoniet
kan de schijflade vastlopen en kunt u de CD-R/RW niet
meer verwijderen.
Een CD-R/RW plaatsen
1. Druk op de Eject-knop om de schijflade te openen.
2. Schuif de schijflade open.
3. Plaats de CD-R/RW met het gaatje over de stopper van
het CD-R/RW-station.
4. Druk de CD-R/RW naar beneden. De CD-R/RW klikt
vast op de stopper.
fig.CD set
* Controleer altijd of de CD-R/RW goed is geplaatst, aangezien
u enige kracht moet uitoefenen om hem te plaatsen. Als u een
cd niet goed en volledig plaatst, kan dat de schrijffunctie
belemmeren.
5. Sluit de schijflade zodat hij vastklikt in de BR-900CD.
Een CD-R/RW verwijderen
1. Hou de stopper tegen en trek de buitenrand van de
CD-R/RW lichtjes omhoog.
fig.CD eject
Als de schijflade niet open gaat
Als het toestel uitgeschakeld wordt terwijl de cd nog in het
station zit (zoals bij een stroompanne), kunt u de schijflade
niet openen met de Eject-toets. In dat geval moet u de lade
handmatig openen, met wat ijzerdraad bijvoorbeeld.
fig.Hole
Zorg dat de BR-900CD uit staat voor u de lade probeert te
openen via het Emergency Eject-gaatje. Als u hier iets
insteekt terwijl het toestel aan staat, zou u de cd kunnen
beschadigen of onvoorziene problemen veroorzaken.
Richtlijnen voor het gebruik van microfoons
Schakel de fantoomvoeding altijd uit tenzij u condensatormicrofoons aansluit, die fantoomvoeding nodig hebben. Wanneer u
dynamische microfoons, audio-apparatuur en andere apparaten die geen fantoomvoeding gebruiken, toch voorziet van fantoom-
voeding, kan dit uw apparatuur beschadigen.
Voor meer uitleg over microfoons raadpleegt u het best de handleiding van de microfoon die u gebruikt.
* BR-900CD fantoomvoeding: +48 V DC, 7 mA Max.
Fantoomvoeding wordt gelijktijdig aan de XLR-aansluitingen voor MIC 1 en MIC 2 geleverd. U kunt de fantoomvoeding niet aan-
of uitzetten voor elke aansluiting apart.
Als u tegelijkertijd microfoons gebruikt die wel en niet fantoomvoeding nodig hebben, moet u de microfoons die geen
fantoomvoeding nodig hebben, aansluiten op een van de 1/4 inch phone jacks. Enkel de XLR-aansluitingen worden voorzien van
fantoomvoeding, niet de 1/4 inch phone jacks.
Sluit microfoons aan op de 1/4 inch phone jacks met een XLR-to-phone adapterkabel of een ander soort adapter uit de winkel.
Emergency eject-gaatje
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BR-900CD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BR-900CD in the language / languages: Dutch as an attachment in your email.

The manual is 12,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info