Manual Rodek ri 450 200 (page 24 of 28) (English, German)

168044

Zoom out

Zoom in

1/28

CROSSOVER SETTINGS

5.5 ADJUSTING INPUT SENSITIVITY

To reach a maximum noise-free dynamic headroom from each

individual head unit/amplifier/speaker combination, it is impor-

tant to set the respective input gain controls correctly. The input

level settings determine the actual signal-to-noise ratio, and they

are also responsible for obtaining the maximum distortion-free

SPL (sound pressure level) from your specific setup.

Turn-on your head-unit and set the volume control to approxi-

mately 3/4 of full volume, while playing a dynamic track from

a CD. Slowly increase the LEVEL adjustment control of the

channel pair to which your subwoofer system is connected to.

Turn up the (sub channel) level control knob until you can just

about hear distorted bass sounds. Now you reduce the volume

level of your head unit to a „normal“ listening level and „add“ all

the remaining channel pairs, by turning up the corresponding

level controls - aiming for a balanced sound with a slight em-

phasis in the bass range. All remaining channels, no matter if

this concerns rear mounted coaxials, component- or kickbass

systems installed in the front doors - must be balanced against

the main level setting of your subwoofer.

RI-Amp 5-CH Manual_D+E.indd 24 05.01.2008 12:45:33 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rodek ri 450 200 in the language / languages: English, German as an attachment in your email.

The manual is 3,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rodek ri 450 200 Manual

Product: