Avoid dropping your watch on the ground. Severe shocks could cause
serious damage to the mechanism. Avoid exposing the watch to direct
sunlight or leaving it in a high temperature location for a long period of
time. Do not leave it in a cold place either. Do not operate the crown
when the watch is wet. Wash the metallic watch band with a brush in soapy
water. After that, wipe well with a soft cloth having good water absorption
properties to eliminate all water.
Getting your watch checked once every year or two is recommended to
ensure long and trouble free operation. Your RODANIA-chronograph is
an accurate quality watch. Have your battery replaced by a professional
watchmaker.
He can check the condition of the O-rings and replace them if necessary, in
order to keep your watch water resistant even after a battery replacement.
For further information, please refer to your international guarantee.
If your watch has a tachymeter scale
A tachymeter is used to display the speed of a vehicle: How many seconds
does it take to cover 1 km? You can measure for a maximum of 60 seconds.
Start the chronograph at the rst mark. After travelling one kilometre, stop
the chronograph. The average speed can then be read on the tachymeter
scale of your watch.
For example, if it takes 45 seconds to cover one kilometre of road, the
average speed will be around 80 km/h.
INSTRUCTIONS FOR QUARTZ WATCHES
TR06 (T61)
1
ST
CLICK
2
ND
CLICK
CROWN
NORMAL POSITION
BUTTON A
BUTTON B
CHRONOGRAPH
MINUTE HAND
CHRONOGRAPH MINUTE HAND
CHRONOGRAPH
SECOND HAND
CHRONOGRAPH SECOND HAND
SECOND HAND
SECOND HAND
24-HOUR HAND
24-HOUR HAND
DATE
Setting the time
1. pull the crown out to the 1
st
click (1)
2. turn the crown to adjust the hour and minute hands
3. when the crown is returned to the normal position synchronised with the
time signal, the sweep second hand starts to move
Adjusting the date
Pull out the crown to the mid-position (1). turn it until the correct date
appears. Do not set the date between 21:00 and 01:00 in the morning as
the date disk is engaged during this period. this could break the mechanism.
Chronometer instructions
This chronometer is capable of measuring and displaying the time in units of
one second up to a maximum of 29 minutes 59 seconds. The chronometer
stops automatically after operating continuously for 30 minutes.
Measuring time with the chronometer
1. press button A to start the chronometer
2. the chronometer can be started and stopped by pressing button A
3. when you press button B, the chronometer is reset and the minute and
second hands of the chronometer return to zero
Remark: buttons A and B are not operational during resetting of the
chronometer.
RESETMEASURING TIMESTOP
A
A
A
B
Resetting the chronograph (also after replacing the battery)
Carry out this procedure when the sweep second hand of the chronograph
does not return to the zero position after resetting the chronograph and
after replacing the battery.
1. pull the crown out to the 1
st
click (1).
2. press button A to set the second hand of the chronograph to the zero
position.
* the minute hand of the chronograph is synchronised with the second
hand of the chronograph.
* the second hand of the chronograph can be advanced rapidly by
pressing continuously on button A.
3. once the hands are on zero, reset the time and reset the crown to the
normal position (0).
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Rodania 26108 - TR06 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Rodania 26108 - TR06 in the language / languages: English as an attachment in your email.
The manual is 0,36 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
