168822
4
Zoom out
Zoom in
Previous page
1/72
Next page
1. Power LED (Top of unit) This Blue LED illuminates when the unit is turned on.
2. Thermal LED (Top of unit) This Red LED illuminates if the amplifier internal components become
too hot and engage the thermal protection.The amplifier will shut down to cool
if this occurs.
3.
Protect LED (Top of unit) This Yellow LED illuminates if a short circuit or too low of an impedance
is detected at the speaker connections.The amplifier will automatically shut down if
this occurs.
4. Output Display (Top of unit) – These LEDs simulate VU meters to display the real-time output of
the amplifier from - 00 (infinity) to +2dB. During normal operation the indicator should not reach
+2dB, as this indicates clipping.
5. Batt (Battery) Display (Top of unit) – These LEDs simulate VU meters to display the real-time
input voltage to the amplifier from 9 to 16 volts DC.
6.
Cast Aluminum Heatsink The cast aluminum heatsink of the Power amplifier dissipates heat
generated by the amplifier's circuitry.
7.
Speaker Terminals The heavy duty,nickel-plated wire connectors (
+
and -) will accept wire sizes from
8 AWG to 16 AWG.
8.
Remote Punch EQ (Optional Controller) The Remote Punch EQ connection is made with a RJ-45
cable and can be installed in a variety of ways for easy control access.The control is used to boost low
and/or high frequency information to overcome road noise.The remote overrides the Punch EQ on the
amplifier when connected.
NOTE: Previous (prior to 2007) Punch Bass and Para-Punch remotes will not work with these amplifiers.
9.
bd Sync Connection – These amplifiers have a 6 pin mini DIN connector.When operating two
amplifiers together in a bridged mode, a bd Sync cable must be used.This will allow the two
independent frequency carrier generators in each unit to be synchronized.
10. Punch EQ This control is a narrow band adjustment variable from 0dB to +18dB @ 45Hz with a
Gyrator based Punch EQ that eliminates fr
equency shift with boost.
4
DESIGN FEATURES
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rockford Fosgate t2500 1bd at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rockford Fosgate t2500 1bd in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info