66682
5
Zoom out
Zoom in
Previous page
1/44
Next page
Use this section when installing Component Systems
A solid front stage with a good image is one of the most difficult tasks to achieve in a vehicle. No car has the
optimum listening environment.This makes proper sound staging very difficult to accomplish. Most speakers
tend to be placed where they will fit easily, as opposed to where they can perform the best.The mounting
location of your speakers will have a great effect on the sound quality of your stereo system.The special care
taken to place the speakers will yield many hours of listening enjoyment in return. Several important recom-
mendations should be followed.
Place the speakers where they have a direct path to the listening area.
For the best integration between the midrange and tweeter, the tweeter
should be placed less than 2" from the midrange (Figure 1).
If you cannot place the tweeter less than 2" from the midrange, then
place the tweeter more than 7" from the midrange. Placing the tweeter
2"–7" from the midrange can cause destructive interference (frequency
response problems) which will affect the speaker's ability to reproduce
the frequency range around the crossover frequency of the system.
Whenever possible, place the tweeter directly above or below the
midrange as this maximizes the imaging (point source) capability of the
speakers (Figure 1).
Sound radiated from a “point source” provides the best stereo imaging
because the separation of the acoustical centers between the midrange
and tweeter for each channel is at the optimum distance. In a closed en-
vironment such as an automobile, horizontal speaker alignment (Figure
2) can cause amplitude and phase differences which will degrade not
only the imaging, but also the frequency response.
This is due to the path length differences between
the midrange and tweeter. Mounting the speaker with
minimum path length difference will ensure the best
staging and imaging possible from your audio system.
5
INSTALLA
TION
2" or Less
Figure 1
Figure 2
Screws
Flush Mount
Surface Mount
Bottom
Housing
Tweeter
Clips
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rockford Fosgate T 162 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rockford Fosgate T 162 S in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info