739022
36
Zoom out
Zoom in
Previous page
1/39
Next page
34

robot away from the magnetic tape and restart.
The robot is too close to a magnetic tape and cannot start. Move it to a new location
and restart.
Error 12: The battery is too low. Recharge before use. Low battery. Recharge before use.
Troubleshooting

Error 13: Charging error. Clean the charging contact area. Use a dry cloth to clean the charging contacts on the robot and on the charging dock.
Error 14: Battery error. The battery temperature is either too high or too low. Wait until it returns to normal.
Error 15: Clean wall sensor. The wall sensor is blocked by dust. Wipe clean the sensor.
 
Error 17: Side brush module error. Reset the system. The side brush module is experiencing a fault. Reset the system.
Error 18: Vacuum fan error. Reset the system. The vacuum fan is experiencing a fault. Reset the system.
Error 21: Vertical bumper pressed. Release it and retry. The vertical bumper has been pressed. Relocate the robot and retry.
The dock locator signal is blocked by dust. Clean it and retry.Error 22: Dock locator dirty. Clean and retry.
The dock location beacn is blocked by dirt. Clean it and retry.Error 23: Dock location beacon lost. Clean and retry.
Move the robot away from the virtual no-go zone or barrier tape and retry.
Error 24: No-go zone or barrier tape detected. Move the
robot away and retry.
Malfunction due to an internal error. Reset the system.Internal Error.
Error Solution
Note:
A system reset may not resolve all problems.
If the problem persists after using the recommendations in the table above, please email our after-sales service team:
US/Non-Europe Support: support@roborock.com Europe Support: support@roborock-eu.com
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roborock S6 Max V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roborock S6 Max V in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roborock S6 Max V

Roborock S6 Max V User Manual - German - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info