625556
4
Zoom out
Zoom in
Previous page
1/46
Next page
NX SERIES V0913 3
English
Important instructions when ordering
spare parts
Always mention the following items on your order :
Type of machine
Serial number from manual
Part number and quantity
Your reference and correct phone and fax number
FOR YOUR SAFETY AND THE PROLONGED USE OF YOUR MACHINE: USE ONLY
ORIGINAL PARTS OF ROBLAND !!!
Safety and maintenance instructions
Woodworking with machinery is a pleasant job that will give you a lot of satisfaction. Nevertheless,
working with a machine requires constant attention and care. Therefore, for your own safety, pay
attention to the instructions summarised in this chapter.
The machine can only be used safely if the operator strictly follows the operating and safety
instructions.
It is absolutely essential to read this manual before using the machine so you know how the
machine works and what its limitations are.
Always make sure that all safety devices are tted to the machine and that the machine is
connected to a dust extraction system.
Also provide sufficient space around the machine and good lighting in the workshop.
When changing the tools or when doing a maintenance job, the machine must always be
disconnected from its power supply.
Knives and tools which are not correctly sharpened or are in bad condition not only diminish the
quality of the work, but also increase the risk of accidents.
Always wear suitable clothing. Loose or torn clothes are very dangerous.
Keep children away from the machine and the workshop.
To avoid damaging your hearing, the wearing of ear protection is mandatory.
When cutting narrow pieces always use a push stick. When damaged replace the push stick at once.
When cutting round work-pieces, always make sure the work-piece is secured against slipping.
Always use adapted jigs and templates and saw blades adapted to the work being carried out.
Carefully read the recommendations for adjusting the brake of the main saw brake motor.
Make sure all periodic maintenance work is done on time. These maintenance works may only
be carried out with the machine disconnected from the main power supply line thus rendering it
impossible to start the machine involuntarily.
Read carefully the instructions for cleaning the machine, clean only with the machine disconnected
from it’s power supply line.
Test on a weekly basis the following electrical components: emergency stops buttons, the safety
switches on the saw unit and test if the machine can be started-up with open doors.
Test on a weekly basis if the run down time of the saw motor brake does not exceed the 10 seconds.
Please read the noise emission values in the manual.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland NX310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland NX310 in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland NX310

Robland NX310 User Manual - German - 100 pages

Robland NX310 User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info