592175

Roadstar TRA-800BT Manual

4
Zoom out
Zoom in
Previous page
1/14
Next page
English English
main supply of 230V ~ 50Hz when connected the external AC Adapter
(1). Connect the AC power adapter to the AC household main outlet,
the red LED will light up. Ensure that the voltage is as indicated on the
rating plate on the rear of the unit.
STATUS BATTERYINDICATOR
FULLY CHARGED NO LIGHT
CHARGING RED LIGHT
LOW BATTERY FLASHING RED LIGHT
NOTE: Charge the unit at least once a month to maintain the internal
battery integrity even when not in use.
SETTINGTHECORRECTTIME
1. Switch OFF the unit by pressing teh ON / OFF button (13).
2. Keep pressed the Scan / Clock button (7) for three seconds.
2. Press the TUNE+ or - (8) button to advance hour
3. Press shortly the Scan / Clock button (7) again.
3. Press the TUNE + or - (8) button to advance MINUTE until the
correct time is displayed.
4. Press shortly the Scan / Clock button (7) to complete the setting
operation.
LISTENINGTOTHERADIO
1. Press shortly the ON/OFF/AUTO (13) button to switch the Radio
ON .
2. Press 3 seconds the Scan / Clock button (7) to start the Radio auto-
tuning function (the unit will store automatically the strongest
stations).
3. Adjust the VOLUME Control (15) to a comfortable listening level.
5. To listen the desired Radio stations, short press MEMORY button (9)
to enter in the stored station, then press TUNE + or - (8) to select
the desired Radio station.
6. To search manually a Radio station, when in RADIO mode press
the TUNE + or TUNE - (8) button sequentially until the desired
frequency is displayed. If the TUNE buttons are pressed for more
than 2 seconds, the Radio start searcing the station automathically.
6. To store manually the desired station in the memory, tune the
station first then keep pressed the MEMORY button (9) three
seconds. The Display show the Memory number, then press the
TUNE + or - (8) to select the desired memory number, then press
shortly the MEMORY button (9) to store the station.
7. To listen the stored stations, refer to the chapter 5.
3 4
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar TRA-800BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar TRA-800BT in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info