592089
3
Zoom out
Zoom in
Previous page
1/12
Next page
EnglishEnglish
LOCATION OF CONTROLS
1. Power cord
2. Antenna
CONNECTING TO POWER
Before switching on make sure that the voltage of your electricity supply is the same as that indicated
on the rating plate.
For your own safety read the following instructions carefully before attempting to connect this unit to
the mains.
MAINS (AC) OPERATION
This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other power sources
may damage the unit.
CAUTION
To prevent electric shock disconnect from the mains before removing cover. No user serviceable parts
inside. Refer servicing to qualified service personnel.
SAFETY PRECAUTION
Do not allow this unit to be exposed to rain or moisture.
Mains Supply: 230V 50Hz - AC only
This symbol means that this unit is double insulated. An earth connection is not required.
POWER SUPPLY
Remove the stereo carefully from the box, retaining the packaging for future use.
AC POWER OPERATION
Connect the plug to a mains power inlet 230V AC ~ 50 Hz.
CONNECTIONS
SPEAKER CONNECTION
Connect each speaker to the corresponding speaker terminals (16 / 17) on the back of the system.
Ensure that the left speaker is connected to the leftterminals, and the right speaker to the right terminals.
MW/FM TUNER
OPERATION
Press the Function Selector sequentially (11) until the RADIO AM or FM compare in the
display.
Tune to the desired radio station by turning the Tuning control (10).
To POWER OFF press the Function Selector (11) three seconds.
ANTENNA
For FM reception there is a built-in FM antenna wire at the rear of the unit (2). Move the wire
around to obtain the best reception.
For MW reception the signals are picked up through a built-in ferrite antenna. Your may have
to orient the unit to obtain the best reception.
in the display.
CLOCK SETTING
1. Make sure the unit is in standby mode.
2. Press and hold “CLOCK SET” (13) button until the unit entered the year setting.
3. Press “SKIP +” (8) or “SKIP -” (9) to select the desired year.
4. Press “Clock Set” (13) button once to confirm
3 4
skip button
10. Tuning Control
11. Function Selector (RADIO/USB/CD/AUX)
12. Remote sensor
13. Mode Display / Clock / Repeat / Program Button
14. Album button
15. CD Open corner
16. Left Speaker (L)
17. Right Speaker (R)
18. AUX-IN
19. Eadphone output
20. Snooze button
FM-STEREO RECEPTION
Stereo reception is possible when the tuned FM station is broadcasting in stereo.
When in FM mode and the station is broadscasting in Stereo, the STEREO indicator compare
7. CD/USB Play/Pause-Button (II)
FM
3. LCD Display
4. USB Port input
5. volume up /Alarm 1
6. volume down / Alarm 2
8. CD/USB Forward
Skip/Search Button
9. CD/USB
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar HIF-3650UMP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar HIF-3650UMP in the language / languages: English, German as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info