592293

Roadstar CLR-2496P Manual

3
Zoom out
Zoom in
Previous page
1/20
Next page
English English 1 2
LOCATION OF CONTROLS
1. MODE / OFF / ON SWITCH (RADIO)
2. SLEEP BUTTON
3. SET CLOCK BUTTON
4. TUNING DOWN
5. CLOCK LCD DISPLAY
6. MEMO BUTTON
7. VOLUME DOWN
8. VOLUME UP
9. TUNING UP
10. SNOOZE / LIGHT BUTTON
11. ALARM 1 BUTTON
12. ALARM 2 BUTTON
13. IMAGE ROTATION
14. FOCUS PROJECTION
POWERSUPPLY
This unit operates from a main supply of 230V ~ 50Hz. Connect the AC power
cord to the AC household main outlet. Ensure that the voltage
is as indicated on the rating plate on the rear of the unit.
BATTERY BACK-UP POWER FAILURE PROTECTION
This radio has a battery back up circuit that will keep the correct time and alarm
settings in the event of a temporary power interruption. Install a 3V battery (type
CR-2032), not included, into the battery compartment (11) located on the bot-
tom of the unit.
Note: We recommend an alkaline battery for longer usable life. Change the
battery every 9 to 12 months for best result and avoid possible battery leakage.
If power is temporarily interrupted the display will blink and the radio will not
play. However, the battery back-up circuit will continue to maintain the clock and
alarm settings. When power is restored the clock will display the correct time
and alarm settings, and no adjustment is necessary.
Note: If power is interrupted and there is no battery in the compartment or
WARNINGS
The exclamation point within the triangle is a warning sign alerting
the user of important instructions accompanying the product.
The lightening flash with arrowhead symbol within the triangle is a
warning sign alerting the user of “dangerous voltage” inside the unit.
To reduce the risk of electric shock, do not remove the cover. No
user serviceable parts inside the unit. Refer all servicing to quali-
fied personnel.
This unit operates on 230V ~ 50Hz. If the unit is not used for a
long period of time, remove the plug from the AC mains.
Ensure all connections are properly made before operating the
unit.
This unit must not be exposed to moisture or rain.
This unit should be positioned so that it is properly ventilated.
Avoid placing it, for example, close to curtains, on the carpet or in
a built-in installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-2496P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-2496P in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info