559860
5
Zoom out
Zoom in
Previous page
1/16
Next page
5
TOASTING INSTRUCTIONS
1. Make sure both crumb trays are locked in position on the bottom of the Toaster
and the toasting levers are both in the UP position.
2. Make sure no bread or other objects are inside the toasting slots.
Place Toaster on a flat, level, heat resistant surface.
3. Plug the power cord into a 120 V AC electrical outlet.
4. Position the adjustable browning
knob(s) to desired setting. The 4 slots offer you
2 independent toasting browning controls. To test toasting times for browning,
it is best to use all toasting slots; position both of the adjustable browning knobs
between (3) and (4) medium; then adjust each subsequent toasting
to your preference.
5. Remove all protective wrappings from food before placing into the toasting
slot(s).
IMPORTANT: Avoid toasting torn bread slices or small pieces of toaster food
that may get lodged in toasting slot(s).
6. Insert bread or toaster food into the toasting slot(s). You may toast in any
or all of the 4 slots. Lower the corresponding toasting lever(s) until locked
into place. The automatic centering guides hold food upright for uniform
side-to-side toasting. When the bread is lowered into position,
toasting will begin.
7. NOTE: The toasting lever(s) will not lock into position unless the Toaster
is plugged into a 120 V AC electrical outlet.
NOTE: When toasting a single slice, the bread may be placed
in any toasting slot.
NOTE: To prevent a fire hazard, never place bread over the opening
of the Toaster; always place bread into the slots.
NOTE: DO NOT change either of the adjustable browning knob
selections during
the toasting cycle. First turn the corresponding adjustable browning knob
to
STOP; t
hen turn the adjustable browning knob
to adjust the browning level.
Lower the corresponding toasting lever and toast until the desired toast color
is achieved.
8. When the toast reaches the selected browning level, it will pop up automatically.
9. Use the high-lift lever(s) to make it easier to remove smaller toasted items.
10. Remove bread from toasting slot(s). Use care when removing bread
as the bread and the top of the Toaster will still be hot.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast,
because that may damage the heating element or cause injury.
11. To interrupt toasting, turn the corresponding adjustable browning
knob to STOP.
12. Unplug cord from wall outlet when not in use.
STOP TOASTING
1. When either of the toasting levers is lowered, toasting will begin.
2. To stop or interrupt any toasting cycle, turn the corresponding adjustable
browning k
nob(s) to STOP. The bread will automaticall
y
rise; the Toaster will
3. Unplug cord from wall outlet when not in use.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rival RV-949 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rival RV-949 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info