559891

Rival IS150 Manual

3
Zoom out
Zoom in
Previous page
1/4
Next page
-5-
CAUTION: The stainless steel BLADE is very sharp. Never attempt to touch the
tip of the BLADE when operating, assembling, disassembling, or cleaning.
1. Make sure the unit is unplugged.
2. Unlock COVER by pressing the COVER RELEASE PUSH BUTTON
located on the back side of the unit. Lift to remove.
3. To remove DASHER, turn the UPPER HOUSING slightly clockwise
until it clicks. This will indicate that the gears are locked in place.
Unscrew DASHER by turning counter-clockwise.
4. Remove UPPER HOUSING by further turning clockwise and lifting.
5. Wipe down all parts and surfaces with a clean damp cloth.
CAUTION: Do not immerse unit in water.
To reassemble: Reverse the above procedure making sure that the UPPER
HOUSING is locked and aligned with the LOWER HOUSING.
Questions? Please contact us at www.rivalproducts.com
or at 1-800-557-4825.
HOW TO CLEAN YOUR SNOW CONE MAKER
-4-
1. Clean all components prior to first using
(See HOW TO CLEAN YOUR SNOW CONE MAKER).
2. Lift the POWER PUSH BUTTON LID and
place 4 - 6 ice cubes into the unit, leaving
about 1 inch from the top.
3. Place a wide-mouth cup under the ice chute
to catch the shaved ice.
4. Plug unit into electrical outlet.
5. Be sure that the top and bottom housings
are properly aligned. If the housings are
not aligned correctly the unit will not
activate.
NOTE: Never move the housing when in use.
6. Press the POWER PUSH BUTTON LID at the “PUSH” position to
start making shaved ice. Make sure your cup is under the chute.
7. Clean all excess ice/water from unit after use. (See HOW TO
CLEAN YOUR SNOW CONE MAKER).
NOTE: Occasionally ice may build up and will get lodged in the chute.
If ice is not coming out of the chute gently shake the unit to ensure
the ice is not frozen together.
CAUTION: Do not allow children to operate this appliance. The Ice
Shaver is for household use only. Do not attempt to sharpen the BLADE.
HOW TO USE YOUR SNOW CONE MAKER
IS150_08EM2.qxd:IS15008EM2.qxd 7/25/08 10:00 AM Page 5
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rival IS150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rival IS150 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info