559856
5
Zoom out
Zoom in
Previous page
1/15
Next page
AUTOMATIC CENTERING GUIDES
Lowering the toasting lever closes the centering guides, and holds the bread
or toaster food centrally in the toasting slots.
NOTE: The toasting lever will not lock down unless the Toaster is plugged into
a 120 V AC electrical outlet.
TOASTING INSTRUCTIONS
1. Make sure the crumb tray is locked in position on the bottom of the Toaster
and the toasting lever is in the UP position.
2. Make sure no bread or other objects are inside the toasting slots.
Place Toaster on a flat, level, heat resistant surface.
3. Plug the power cord into a 120V AC electrical outlet.
4. Position the browning selector knob to desired setting. To test toasting times
for browning, it is best to use both toasting slots; position the browning
selector knob between (3) and (4) medium; then adjust each subsequent
toasting to your preference.
5. Remove all protective wrappings from food before placing into the toasting
slot(s).
IMPORTANT: Avoid toasting torn bread slices or small pieces of toaster
food that may get lodged in toasting slot(s).
6. Insert bread or toaster food into the toasting slot(s). Lower the toasting lever
until locked into place. The automatic centering guides hold food upright for
uniform side-to-side toasting. When the bread is lowered into position, toasting
will begin.
NOTE: The toasting lever will not lock into position unless the Toaster is plugged
into a 120 V AC electrical outlet.
NOTE: When toasting a single slice, the bread may be placed in any toasting slot.
NOTE: To prevent a fire hazard, never place bread over the opening
of the Toaster; always place bread into the slots.
NOTE: DO NOT change the browning selector knob selection during
the toasting cycle. First turn the browning selector knob to STOP;
then turn the browning selector knob to adjust the browning level.
Lower the toasting lever and toast until the desired toast color is achieved.
7. When the toast reaches the selected browning level, it will pop up automatically.
8. Use the high-lift lever to make it easier to remove smaller toasted items.
9. Remove bread from toasting slot(s). Use care when removing bread as the
bread
and the top of the Toaster will still be hot.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because
that may damage the heating element or cause injury.
10. To interrupt toasting, turn the browning selector knob to STOP.
11. Unplug cord from wall outlet when not in use.
STOP TOASTING
1. When the toasting lever is lowered, toasting will begin.
2. To stop or interrupt any toasting cycle, turn the browning selector knob to STOP.
The bread will automatically rise; the Toaster will turn OFF.
3. Unplug cord from wall outlet when not in use.
6
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rival 16041 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rival 16041 in the language / languages: English as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info