Manual Rio CNHR2 - Electrolysis Hair Remover (page 1 of 2) (English)

651361

Zoom out

Zoom in

1/2

instructions

™

ELECTROLYSIS

HAIR REMOVER

Rio, Dezac and Electrolysis Hair Remover™

are trademarks of The Dezac Group Ltd

PO Box 17, Cheltenham Spa, England GL53 7ET

www.riobeauty.com

Using micro current technology the Electrolysis Hair Remover

destroys the hair root and papilla to prevent future hair growth.

The micro current changes the pH in the hair follicle to alkaline

which then starts to attack the hair root and papilla cells (it is

these cells which are responsible for hair growth). This action

continues for sometime after the treatment is complete and

the hair has been removed.

It is not always possible to kill all of the papilla cells in a single

treatment and in these situations the hair may regrow. If it does

regrow it is generally much finer and lighter than previously.

Successive treatments will kill the papilla cells giving a

permanent result. You may use your normal epilation

methods in between treatments.

The destruction of the hair root cells continues for some

time after the treatment has finished. It makes no difference

whether you remove the hair immediately or not.

If there is a particularly stubborn hair, an additional treatment

or longer treatment time may be required.

As with all hair removal treatments it is recommended that

the area you have treated is washed with cool water and a

mild antiseptic cream applied.

TIPS

 

detect the conductive gel.

 

battery power is low and it needs replacing.

 

The use of a good quality, leak-proof alkaline battery

is recommended.

 

the battery or unplug from the mains.

 

power adapter, which plugs into the adapter socket on

the side. To order please call the Customer Careline.

 

 

 

on the console unit and do not use them for any other

purpose than intended.

 

cloth, the console unit can also be wiped over.

1. Console

 

3. Treatment indicator

(AMBER)

4. Control dial

5. Treatment complete



6. Wand output socket

7. Power adapter socket

(optional extra available

from the Customer Careline)

8. Tweezer Socket

 

10. Conductive gel



YOUR ELECTROLYSIS

HAIR REMOVER

CONDUCTIVE GEL

professional range

BODY CARE

BATTERY 9V PP3



PROBLEM FAULT/CAUSE REMEDY

Amber treatment

light does not



and console

bleeps.

Good contact

with the hair

is not being

maintained or

your finger is not

touching tweezer

button.

Check tweezers

are connected

Ensure you are

using gel.

Grasp hair at

skin level.

The amber light

has gone out and

the console is

bleeping.

The contact

with the hair or

tweezer button

has been lost.

If the contact is not

re-established

within three

seconds the

treatment timer will

assume you have

moved onto a new

hair and restart

the treatment from

the beginning.

Grasp hair

at skin level.

The console is

bleeping and the

power light is

flashing.

Console left on -

and not used.

Turn the

console off.

Console is

bleeping

constantly.

Low Battery. Replace battery.

The hair is

difficult to

remove.

More than a

single treatment

is required to kill

this hair.

If there is a lot

of resistance

an additional

treatment or longer

treatment time of

the same hair

may be required

Hair regrows.

It is not always

possible to kill

all of the papilla

cells in a single

treatment.

Repeat the

treatment when the

hair grows back.

Use a longer

treatment time.

Redness of skin

after treatment.

This is quite

normal, you may

wish to apply an

antiseptic cream,

however the

redness should

fade within one

or two hours.

Treatment light

on continuously.

Contact is being

maintained

even when the

tweezers are not

in use.

Clean tweezers

with a damp

cloth thoroughly,

removing all traces

of conductive gel.

1-IN-CNHR2-UK / 1.1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rio CNHR2 - Electrolysis Hair Remover in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rio CNHR2 - Electrolysis Hair Remover Manual

Product: