651366
2
Zoom out
Zoom in
Previous page
1/2
Next page
Ensure the unit is switched off before cleaning.
Remove the roller head by
pushing the release button.
Clean the head
with the cleaning
brush.
To clean the roller, remove from
the head by pushing up the
roller release button. Rinse roller
under a tap and dry thoroughly.
Make sure the roller and roller
head is firmly installed before
switching the unit back on.
The body of the unit should
be cleaned with a soft cloth.
Do not immerse it in water. Do
NOT use solvents or abrasive
cleaners.
INTRODUCTION
60 SECOND PEDI
™ Hard Skin Remover buffs away,
hard, rough and dry skin in seconds, leaving you with
fabulously smooth feet.
1 Roller
2 Roller release button
3 Roller head release button
4 Slide on/off switch
(with 2 speed settings)
5 Safety switch lock
6 Battery cover
7 Cleaning brush
BATTERY FITTING
AND INFORMATION
To fit the battery, remove the battery cover on the
back of the unit by sliding it downwards.
Insert three 1.5v AAA alkaline batteries ensuring the
(+) and (-) terminals are as shown.
Replace the cover ensuring it is shut firmly in place.
If the unit is left unused for a long period of time,
remove the batteries.
• Do NOT use rechargeable batteries.
Please ensure that the batteries are disposed of
in the correct manner in accordance with local
authority requirements.
HOW TO USE CLEANING
CHANGING THE
ROLLER
For best results, it is recommended that you change
the roller as soon as it shows signs of wear or
becomes less effective. The amount of time between
replacements will depend upon the frequency of use
and the size of the area being treated. Do NOT use
attachments that are not recommended.
Remove the roller by pushing up
the release button on the side of
the unit.
Place the new roller in the unit
and ensure that the larger hole
matches up with the larger pin
before clicking into place. Make
sure the roller is firmly installed
before switching the unit back
on.
1
2
4
KNOW YOUR UNIT
1
2
3
5
4
6
7
FRONT BACK
60 SECOND PEDI
Hard Skin Remover is suitable
for smoothing away hard, rough and dry skin on the
feet and heels only. You should not use it on any
other part of the body.
STEP 1
Ensure that the skin on your feet
is clean and completely dry.
Note: You should not use
60 SECOND PEDI
Hard Skin
Remover on broken skin.
STEP 2
Turn the unit on by pressing the
safety lock button in the centre
of the on/off switch and pushing
the switch up.
STEP 3
Select the programme speed by
pushing the switch half way up
for low (1) and all the way up
for high (2).
STEP 4
Gently move the unit backwards
and forwards over the area of
hard or dry skin for 2-3 seconds
at a time, stopping to check if
you have achieved the desired
result. Do not apply to one area
of skin for too long or it may
cause discomfort.
Note: Do not press too hard
on the area or the roller will
stop spinning.
STEP 5
Switch off the unit by sliding the
switch down to the off position.
1
3
2
1
5
4
1
+
+
2
3
© Copyright The Dezac Group Ltd. 2015
© Copyright The Dezac Group Ltd. 2015
© Copyright The Dezac Group Ltd. 2015
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rio 60 Second Pedi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rio 60 Second Pedi in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info