744718
11
Zoom out
Zoom in
Previous page
1/12
Next page
8. MANUAL OPERATION
Power failure
During a power failure, the air supply remains unchanged, the logs in the
combustion chamber burn down safely. If the mains supply is restored, stove
name and software version are displayed shortly. Then the display WAIT
(Component test - up to 4 minutes) appears.
A possibly entered ignition time must be activated again.
Manual control
Note
Manual operation is only allowed when the stove is off the grid. Another
approach than the below mentioned may damage the components and lead
to a loss of warranty.
Q Disconnect the stove by switching off the main power switch.
Q Insert the supplied wrench in the place provided.
Q Turn the wrench clockwise until you sense a stop.
Note
Caution, excessive force can cause damage.
Q Pull the wrench from the socket and plug it into a horizontal position again.
You are in heating-up position.
Q Turn the wrench a few minutes after a successful ignition phase
counterclockwise in vertical position. You are now in the medium position.
Q Turn the wrench counterclockwise gradually to reduce the combustion air by
hand and therefore regulate the combustion process by hand.
Note
Always make sure that the stove has enough air for the combustion,
otherwise it may lead to an increased smoke development and subsequently
to a deflagration!
|11
EN
10
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Rikatronic 4 V1.02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Rikatronic 4 V1.02 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Rikatronic 4 V1.02

Rika Rikatronic 4 V1.02 User Manual - German - 12 pages

Rika Rikatronic 4 V1.02 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info