638320
6
Zoom out
Zoom in
Previous page
1/8
Next page
5
quick-start guide
1. Prepare the carpet
a. Use the Rainbow and Power Nozzle to vacuum the entire area to be cleaned, making sure there is no
remaining debris on the surface.
b. Empty and rinse the water basin. Do not rell.
2. Prepare the AquaMate…
a. Begin with an empty water basin. Attach the Rainbow and dolly. Attach the hose and wands.
b. Insert the bottom wand with male end into the opening located on top of the AquaMate. Press downward
until button lock clicks.
c. Add one capful of Rainbow AquaMate Concentrate Solution to the AquaMate soap reservoir.
d. Fill the remainder of the AquaMate soap reservoir with cool, clean tap water and secure the cap tightly.
e. Fill the AquaMate water reservoir with cool, clean tap water and secure the cap tightly.
f. Place the AquaMate tank onto the AquaMate until you feel it lock into place.
3. Shampoo
a. Set the AquaMate switch to the SOAP + WATER position. Turn on the Rainbow to HIGH mode.
b. Squeeze the pistol trigger grip and apply solution to the carpet using slow forward and
backward movements across the oor. Use the handles trigger lock switch to keep the brush
roll fully engaged.
4. Rinse
a. Set the AquaMate switch to the WATER ONLY position.
b. Squeeze the pistol trigger grip and rinse the carpet using slow forward and backward
movements across the oor. Use the handle’s trigger lock switch to keep the brush roll fully
engaged.
5. Extract…
a. Set the AquaMate switch to the EXTRACT position.
b. Extract the remaining water from the carpet using very slow backward movements.
c. For extra dry carpet, go over the entire area a second time.
d. When nished cleaning, empty and rinse the water basin. Allow to dry.
PRIMING THE AQUAMATE
The AquaMate may require priming, which may take approximately 20 seconds. To reduce priming time, several things
can be done:
1. Make sure the water tank is fully seated
2. Turn the valve to the SOAP + WATER position
3. Squeeze and release the handle trigger several times
If the soap reservoir becomes empty while you are operating the AquaMate, and the valve is in the SOAP + WATER
position, no water will be dispensed because air is being sucked through the soap reservoir. When operating the
AquaMate without soap, always ll the soap reservoir with water to prevent loss of prime.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rexair Rainbow Aquamate e2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rexair Rainbow Aquamate e2 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rexair Rainbow Aquamate e2

Rexair Rainbow Aquamate e2 User Manual - German - 8 pages

Rexair Rainbow Aquamate e2 User Manual - Dutch - 8 pages

Rexair Rainbow Aquamate e2 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info