491272
4
Zoom out
Zoom in
Previous page
1/8
Next page
Fuse replacement
If it becomes necessary to replace a fuse, make sure that only fuses of the prescribed type and nominal
current are used (see “Technical Data”).
ƽ
You must not carry out your own repairs to fuses or bridge the fuse holder.
Disconnect the monitor from the power supply.
Unscrew the fuse holder in the red connection.
Remove the defective fuse and replace it with a fuse of the same type.
Close the fuse holder again.
Only then the monitor should be re-connected to the car system and put into operation.
Should the fuse trigger again, have the device repaired in a specialist workshop.
Disposal
a) Product
Electronic devices are recyclable waste materials and must not be disposed of in the household
waste!
Please dispose of the product, when it is no longer of use, according to the current statutory
requirements.
Remove the battery in the remote control and dispose of it separately from the product.
b) Batteries and Rechargeable Batteries
The end user is legally obliged (Battery Regulation) to return used batteries and rechargeable batteries. Do
not dispose of used batteries in the household waste!
Contaminated batteries/rechargeable batteries are labelled with these symbols to indicate that
disposal in the domestic waste is forbidden. The symbols for the relevant heavy metals are:
Cd=Cadmium, Hg=Mercury, Pb=Lead (marking can be seen on the battery/rechargeable bat-
tery, e.g., underneath the rubbish bin symbol shown on the left).
You can return used batteries/rechargeable batteries free of charge to any collecting point in your local com-
munity, in our stores or in any other store where batteries/rechargeable batteries are sold.
You thereby ful l your statutory obligations and contribute to the protection of the environment.
Technical Data
Operating voltage ..........................................12 V/DC
Power consumption .......................................500 mA
Battery for remote control ..............................3 V lithium button cell CR2025
Fuse ...............................................................T2AL/250V (5 x 20 mm)
Display size ...................................................22.9 cm (9”)
Display format ................................................16:9
De nition ........................................................800 x 480
TV format .......................................................PAL/NTSC
Dimensions (without mounting frame) ...........226 x 157 x 30 mm
Installation opening ........................................163 x 232 mm
Mounting depth ..............................................24 mm
Range of operating temperature ....................0 – 50 °C
Weight ...........................................................490 g
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, micro lming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2012 by Conrad Electronic SE.
Operation
(1) PHONE for the connection of a headset
(2) AV IN for the connection of external AV devices
(3) MODE toggles the display format (4:3/16:9)
(4) V1/V2 switches the video input (VIDEO 1 IN/VIDEO 2 IN)
(5) “-” turns the volume down or changes settings in the menu
(6) M is used to access the menu – the menu points are accessed by pressing several times, settings are
performed via the “-” and “+” keys
BRIGHTNESS brightness adjustment
CONTRAST contrast adjustment
SATURATION saturation adjustment
VOLUME volume adjustment
SOURCE selection of the input: VIDEO 1 IN/VIDEO 2 IN
RESET restore of factory settings
L/R mirroring of the display
U/D rotation of the display
16:9/4:3 switching of the display format
EXIT exiting the menu
(7) “+” turns the volume up or changes the settings in the menu
(8) POWER switches the monitor on/off
(9) Infrared receiver for the remote control
(10) Power indicator - lights up when the device is turned on
(1) MUTE – switches the sound on/off
(2) MD toggles the display format (4:3/16:9)
(3) L/R mirrors the display (e.g. for use of a reversing camera)
(4) U/D rotates the display by 180° (if the monitor has been hung up)
(5) AV switches the video input (VIDEO 1 IN/VIDEO 2 IN)
(6) ON/OFF switches the monitor on/off
(7) Adjustment of the display brightness
(8) Adjustment of the display contrast
(9) Adjustment of the saturation of the display
(10) Adjustment of the volume
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce T-900B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce T-900B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info