622830

Renkforce Key safe 20 Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
Operation
Insert the key in the lock on the front side of the safe. In doing that, observe the correct
position of the key.
Open or close the lock of the safe as usual by turning the key.
Keep the key in a safe, but not directly accessible place. You may never keep the safe
key e.g. in a conventional key cabinet, in which other house or cellar keys may be
present
Tips and notes
• The product is suitable for storing valuables and /or protection against unauthorised
access.
Anti-theft protection is achieved constructively, namely through the steel sheet
casing, the door and the double-bit key lock design. Unauthorised access to the
valuables stored in the safe is thus impeded.
• Make sure that no one is watching you when you are opening / closing the safe.
• The thick door with the included lock mechanics does not give access to the entire
interior of the safe. Close the door carefully, do not use excess force! Otherwise,
you may damage the valuables in the safe.
Maintenance and care
• The product is maintenance-free.
• Protect the lock of the safe from dust, dirt and moisture. Otherwise, the lock may
become diffi cult to use. In this case, a few drops of thin spray oil can be a remedy.
• Clean the safe occasionally with a clean, soft, dry cloth. Never use aggressive
cleaning agents or chemical solutions as the surface of the casing could be dama-
ged (discoloured).
Disposal
Dispose of an unserviceable product in accordance with the relevant statu-
tory regulations.
Technical data
Dimensions ......................................... Outside: 200 x 310 x 200 mm (H x W x D)
............................................................... Inside: 195 x 305 x 155 mm (H x W x D)
Door area ............................................ 135 x 215 mm (H x W)
Wall thickness ................................... Casing: 1.5 mm; door: 3 mm
Volume ................................................. ca. 9,3 l
Weight ................................................. 5.25 kg
Variations in dimensions and weight are dependent on the production tech-
nique.
G
Operating instructions
Key safe “20”
Item no. 755003
Intended use
The safe is used for keeping valuables. It has a stable steel sheet casing and can be
mounted either on a wall or a stable surface.
Follow the safety instructions and all other information in this operating manual.
This product complies with the applicable National and European requirements. All
names of companies and products are the trademarks of the respective owner. All
rights reserved.
Package contents
• Safe
• Two keys
• 4 screws and 4 fl at washers
• Operating instructions
Explanation of the symbols
This symbol indicates specifi c risks associated with handling, function and
use.
The “arrow“ symbol indicates special tips and operating information.
Safety instructions
The warranty will be void in the event of damage caused by failure to ob-
serve these safety instructions! We do not assume any liability for any con-
sequential damage!
Nor do we assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instructions! In such
cases, the warranty will be null and void.
• For safety reasons, any unauthorised conversion and/or modifi cation to
the product is not permitted
• The product must not be exposed to extreme temperatures, strong vibra-
tions or heavy mechanical loads. Protect the product from humidity and
dampness.
• The product is not a toy and should be kept out of the reach of children!
• Do not leave packing materials unattended. They may become dangerous
playthings for children.
Installation
Select an installation location, such that the safe is not directly visible or easily ac-
cessible. This can be, for instance, behind the cabinet door or books, fi les or the like.
Installation in a partition wall (hollow wall) would be ideal; a picture can be hung in
front of the door.
Protect the safe from humidity or dampness. Therefore, do not mount the
safe in humid rooms or cellars.
The holes in the casing of the safe allow mounting both on a wall and the fl oor or
another stable surface.
Corresponding screws and appropriate dowels are needed depending upon the
mounting surface.
Additional fi xation using special adhesives, etc. would also be possible, if the moun-
ting surface allows this.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce Key safe 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce Key safe 20 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info