656688

Renkforce 1208457 Manual

3
Zoom out
Zoom in
Previous page
1/6
Next page
• If the product casing is damaged, discontinue product usage! When it is
still connected to the mains, do not touch the radio switch socket or the
connected device! First, switch off the mains socket to which the radio
switch socket is connected (switch off at the circuit breaker). Only then
can you remove the radio controlled switch socket from the mains socket.
Take the product to a specialist workshop or dispose of it in an environ-
mentally friendly way.
Controls
A
B
C
D
E
A) Control-LED (lights up when the mains socket on the front is activated)
B) Front socket for connecting a consumer load with child-proof lock
C) Coding switch I, II, III, IV for one of the four address codes
D) Coding switch for switch channel selection 1, 2, 3, 4
E) Safety plug for connection to the mains socket
Setting the Address Codes
One of the four address codes (I, II, III, IV) can be set on both the handheld transmit-
ter and the radio controlled socket. Thus, several radio controlled switch sets can be
operated in parallel, without interfering with one another.
Select one of the address codes (I, II, III, IV) on the handheld transmitter. Set exactly
the same address code on the associated radio controlled socket(s); use a flat screw-
driver to turn the coding switch (C).
If you set a different code on the handheld radio transmitter and the radio-
controlled switch socket, the switch socket will not react to the switching
commands on the handheld radio transmitter!
Setting the Switching Channel of the Radio Controlled
Switch Socket
On the back of the radio controlled switch socket there is another coding switch (D)
that is marked with the numbers “1”, “2”, “3” and “4”. It is used to select one of the
four switching channels (the handheld radio transmitter has also imprinted the num-
bers “1”, “2”, “3” and “4”) if more than one radio controlled switch socket is operated.
It is of course possible to set the same switching channel for two or more
radio controlled switch sockets. By this the two radio controlled switch so-
ckets are activated or deactivated by one keystroke.
Start-up, Function Test
Plug the radio controlled switch socket (without the consumer load connected!) into
the designated earthed mains socket.
You can now test the function of the radio controlled switch socket, by briefly press-
ing the respective “ON” button for the corresponding switching channel (1, 2, 3 or 4).
The red control-LED (A) on the radio controlled socket lights up. The socket (B) on the
front is now activated; the mains voltage is available and a connected consumer load
is turned on.
Briefly press the button “OFF”, for the switching channel, and the control-LED (A) is
turned off again; the mains voltage at the front mains socket (B) and thus, the con-
nected consumer load, is turned off.
G
Operating Instructions
Radio controlled switch socket, 433 MHz
Item no. 1208457
Intended Use
By using the radio controlled switch socket with the suitable handheld transmitter, a
consumer load connected to the radio controlled switch socket can be turned on or
off.
The radio controlled switch socket is only intended to be used in dry, closed indoor
locations.
It is powered via 230 V/AC, 50 Hz.
All the safety and operating instructions in this manual must be followed carefully.
These instructions not only protect the device but, in particular, your health. Please
read the entire operating manual before using the product.
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.
Package contents
• 1 x radio controlled switch socket
• Operating instructions
Safety Instructions
Damages due to failure to follow these operating instructions will void the
warranty! We do not assume any liability for any resulting damage!
We do not assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instructions. In such
cases, the warranty/guarantee will be null and void.
• The unauthorised opening, conversion and/or modification of this product
is not permitted for safety and approval reasons (CE).
• Do not use this product in hospitals or medical institutions. Although the
product only emits relatively weak radio signals, these may lead to the
malfunction of life-support systems. The same may also apply to other
zones.
• The radio controlled switch socket is designed in accordance with pro-
tection class I. Only a standard mains socket (230V~/50Hz with protective
earth) for the public supply grid may be used as the power source for the
radio controlled switch socket.
• The product is not a toy and does not belong in the hands of children.
Therefore, be especially careful when children are around. Children might
try to push objects through the radio-controlled switch socket’s openings.
There is danger of a life-threatening electric shock!
•
Never touch the product and the mains plug, respectively, with wet or
damp hands when trying to connect to the radio controlled main socket.
There is danger of a life-threatening electric shock!
• Never remove a mains plug from the front of the radio switch socket by
pulling on the power cable. Always pull the plug from the socket, in the
radio-controlled switch socket, using the gripping surface provided on the
side.
• Do not connect adaptor plugs in series!
• The device is only voltage-free when it disconnected from the mains sock-
et.
• Do not overload the radio switch socket (take note of the input power in
the technical data at the end of the operating manual!).
• Do not leave packaging material carelessly lying around, since it could
become a dangerous plaything for children.
• Handle the product with care, it can be damaged by impacts, blows, or
accidental falls, even from a low height.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce 1208457 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce 1208457 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info