700343
2
Zoom out
Zoom in
Previous page
1/4
Next page
INSTALLATION
The first step of installing a speaker system is thorough planning. Choose a suitable location for your speaker
components carefully. Follow these suggestions to ensure proper imaging and maximum performance:
1. Choose a location that offers the least amount of obstruction between the components and your ears.
2. Try to mount the speakers on the same plane. That is, they should be at the same height and directly
across from each other. Do not mount one speaker higher, lower, further forward or further back from the
opposite speaker.
3. Always check behind the chosen mounting locations to ensure that there is proper clearance for the back
of the speakers and avoid obstructions such as window tracks, wire harnesses, gas tank etc.
4. Maximum performance is achieved when the speaker is securely mounted to a door panel or rear speaker
deck. There should be no gaps between the speaker basket and the mounting surface.
CAUTION
Please ensure the correct polarity (+ or -) for all connections.
Never connect loudspeakers directly with the vehicle’s chassis or power supply.
WIRING DIAGRAM AND INTERCONNECTION
ENGLISH
PLUS
MINUS
PLUS
MINUS
WOOFER
TWEETER
IN-LINE
X-OVER
PLUS
MINUS
SPEAKER OUTPUTS OF THE AMPLIFIER
+ L – + R –
PLUS
MINUS
MINUS
PLUS
MINUS
PLUS
TWEETER
WOOFER
WOOFER INTERCONNENCTION:
Connect the plus-cable (white marking) of the included in-line crossover with the plus-terminal of the
woofer (marked with +). Repeat this procedure with the minus-cable (no marking) and connect it with
the minus-terminal of the woofer. Detect the correct cable-pair by the two different sized terminal jacks.
TWEETER INTERCONNECTION:
Connect the plus-cable (white marking) of the included in-line crossover with the “plus-terminal of the
tweeter (marked with +). Repeat this procedure with the minus-cable (no marking) and connect it with
the minus-terminal of the tweeter. Detect the correct cable-pair by the two similar sized terminal jacks.
AMPLIFIER INTERCONNECTION:
Connect the plus-cable (white marking) of the included in-line crossover with the plus-speaker output
of the amplifier (e.g. + L). Repeat this procedure with the minus-cable (no marking) and connect it with
the regarding minus-speaker output of the amplifier (e.g. + L).
Repeat the above mentioned procedure for all other channels of the sound system.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renegade RX6.2C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renegade RX6.2C in the language / languages: English, German as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info