EXTERIOR LIGHTING AND SIGNALS (2/5)
k
Switching on dipped
beam headlights
Manual operation
Turn the end of stalk 1 until the symbol
is opposite mark 2.
In all cases, an indicator light on the in-
strument panel comes on.
Automatic operation (depending on
vehicle)
With the engine running, the dipped
beam headlights are switched on or off
automatically depending on the level of
ambient light, without the need to oper-
ate stalk 1 (position 0).
This function can be deactivated or re-
activated.
– To activate it, with the ignition on,
press button 4 for at least four sec-
onds. An instrument panel message
confirms this action.
– To deactivate it, with the ignition on,
press button 4 for at least four sec-
onds. The “Auto lights OFF” mes-
sage is displayed on the instrument
panel.
If stalk 1 is operated, it overrides and
cancels the automatic function tempo-
rarily.
See-me-home lighting
function
This function (useful, for example, for
opening a gate, a garage, etc.) enables
you to switch on dipped headlights mo-
mentarily.
With the ignition off and the headlights
off, pull stalk 1 towards you: the dipped
beam headlights come on for approxi-
mately thirty seconds.
This action may be carried out no more
than four times for a maximum lighting
period of two minutes.
To switch off the lights before they
go out automatically, turn the end of
stalk 1, then return it to position 0.
1
2
4
