587952
32
Zoom out
Zoom in
Previous page
1/36
Next page
5.2
Gebruik van
PV-stroomoverschot
De zelfgeproduceerde fotovoltaïsche stroom wordt
in de eerste plaats in het huishouden (verlichting,
huishoudapparatuur enz.) gebruikt. Als meer PV-
stroom wordt geproduceerd als nodig is, wordt
deze voor het genereren van warmte met de
warmtepomp gebruikt in plaats van teruggevoed in
het stroomnetwerk. De overtollige PV-stroom wordt
echter uitsluitend gebruikt als het eigengebruik
gunstiger is als de opbrengst door de voedingsver-
goeding. Om dit te berekenen, is het huidige ver-
mogen van de PV-installatie, het huidige verbruik
van de huishoudelijke stroom en de huidige elektri-
sche capaciteit van de warmtepomp benodigd.
Hiertoe kunnen reeds beschikbare elektrische
stroomtellers met een S0-interface worden
gebruikt. Voorwaarde hiervoor is dat het nutsbedrijf
dit toestaat. Anders kunnen eigen stroomtellers
voor de functie "PV-stroomgebruik" worden geïn-
stalleerd.
De impulsratio van de S0-uitgang van de teller
resp. de wisselomvormer moet ten minste 500
lmp./kWh bedragen. Als de impulsratio bij beschik-
bare tellers minder is, adviseren wij om tellers met
overeenkomstige impulsratio's te plaatsen. De
impulsratio's kan in de regelaar worden ingesteld.
Let op dat bij enkele stroomtellers een impulsratio
aan de voorzijde wordt afgegeven. Dit geldt echter
meestal voor de weergave-LED en niet voor de
S0-uitgang. De impulsratio van de S0-uitgang
moet altijd uit de technische documentaties van de
tellers worden gehaald.
2
1
4
3
Afb. 30: Toekenning eigen tellers
W: Stroomteller
1: Warmtepomp
2: EVU
3: Huishouden
4: Fotovoltaïsch
P
H
: P-huishoud
P
P
: P-fotovoltaïsch
P
W
: P-warmtepomp
2
4
3
1
Afb. 31: Toekenning van de teller met externe tel-
lers
W: Stroomteller
1: Warmtepomp
2: EVU
3: Huishouden
4: Fotovoltaïsch
P
B
: P-opbrengst
P
E
: P-voeding
P
P
: P-fotovoltaïsch
P
W
: P-warmtepomp
De tellers worden als klemrailtellers uitgevoerd.
Voor de huishoudstroom is een 3-fasige teller
benodigd, voor de warmtepomp en de PV-instal-
latie is afhankelijk van de uitvoering een 1-fasige
teller of ook een 3-fasige teller benodigd.
WKF/WKF-compact
85 en 120
WKF/WKF-compact
180
1-fasig 3-fasig
De tellers voor PV-generering en opbrengst/voe-
ding zijn bij een PV-installatie met eigengebruik-
optie in elk geval aanwezig. De in het schema
weergegeven bidirectionele teller voor opbrengst
en voeding kan ook als twee gescheiden tellers
voor opbrengst en voeding zijn uitgevoerd.
De stroomteller voor het stroomverbruik van de
warmtepomp hoeft niet aanwezig te zijn, kan
echter zoals hierboven achteraf worden geplaatst.
Voor de verbinding tussen de stroomtellers en de
REMKO-regelaar moeten absoluut afgeschermde
kabels met een kabeldoorsnede van ten minste 0,5
mm
2
worden gebruikt. Voor elke stroomteller moet
een eigen kabel worden gebruikt om wisselwer-
kingen tussen de signalen te vermijden.
REMKO Smart WP-MANAGER
32
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO Smart-Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO Smart-Control in the language / languages: Dutch as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO Smart-Control

REMKO Smart-Control User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info