587834
4
Zoom out
Zoom in
Previous page
1/56
Next page
Safety notes
Disposing of the units and
their components
Only recyclable materials are used
in the manufacture of the units
and components.
Help protect the environment
by ensuring that the units or
components (for example
batteries) are not disposed of
in household waste, but only in
accordance with local regulations
and in an environmentally safe
manner, e.g. using authorised
disposal and recycling
specialists or council
collection points.
Intended use
Depending on the model, the
units and the additional fittings
with which they are equipped are
only intended to be used as an
air-conditioner for the purpose of
cooling or heating the air in an
enclosed space.
Any different or additional use shall
be classed as non-intended use.
The manufacturer/supplier assumes
no liability for damages arising from
such use. The user bears the sole
risk in such cases.
Intended use also includes
working in accordance with the
operating manual and installation
instructions and complying with the
maintenance requirements.
Carefully read the operating
manual before placing the unit in
service for the first time. It contains
useful tips and notes such as
hazard warnings to prevent injury
and material damage . Failure to
follow the directions in this manual
can result in endangerment to
persons, the environment and the
equipment itself and will void any
claims for liability.
Keep this manual and the
refrigerant data sheet near to
the units.
The units and components
should be set up and installed
only by qualified personnel.
The set-up, connection, and
operation of the unit and
its components must be in
accordance with the operating
conditions stipulated in this
manual and comply with all
applicable local regulations.
Mobile units must be set up
securely on suitable surfaces and
in an upright position. Stationary
units must be permanently
installed for operation.
Modification of units and
components supplied by
REMKO is not permitted and
can cause malfunctions.
Units and components may
not be operated in areas where
there is an increased risk of
damage. Observe the minimum
clearances.
The electrical supply is to be
adapted to the requirements of
the units.
The operational safety of
the units and components
is only assured if they are
fully assembled and used as
intended. Safety devices may
not be modified or bypassed.
Do not operate units or
components with obvious
defects or signs of damage.
All housing parts and openings
in the unit, e.g. air intakes and
outlets, must be free of foreign
objects, fluids, or gases.
The units and components must
be kept an adequate distance
from flammable, explosive,
combustible, abrasive and dirty
areas or atmospheres.
Touching some parts of the
unit can result in burns or other
injuries.
Installation, repair and
maintenance work may be
carried out only by authorised
specialists. Visual inspections
and cleaning can be performed
by the operator as long as
power is disconnected from the
equipment.
To preclude any danger from the
unit, take appropriate hazard-
prevention measures when
performing installation, repair or
maintenance work or cleaning
the units.
The units or components
are not to be exposed to any
mechanical stresses, extreme
levels of humidity or direct
sunlight.
Warranty
The precondition for possible
warranty claims is that the orderer
or his customer has fully filled
out and returned the warranty
document included with the unit to
REMKO GmbH & Co. KG between
the time it was sold and when it
was placed into service.
and placing the unit in service.
The warranty conditions are
listed in the "General terms and
conditions". Furthermore, only
the parties to a contract can strike
special agreements beyond these
conditions. For this reason, please
contact your contract partner in the
first instance.
Disposing of packaging
All products are packed for
transport in environmentally
friendly materials. You can make
a valuable contribution to reducing
waste and sustaining raw materials
by only disposing of packaging at
approved collection points.
Environmental
protection
and recycling
REMKO RXT...DC
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RXT521 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RXT521 DC in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RXT521 DC

REMKO RXT521 DC User Manual - German - 52 pages

REMKO RXT521 DC User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info