587837
6
Zoom out
Zoom in
Previous page
1/56
Next page
Operation
Infrared remote control
The infrared remote control sends
the programmed settings over
a distance of up to 6 m to the
receiver of the indoor unit. Data
will only be received correctly if the
remote control is pointed at the
receiver and no objects obstruct
the transmission path.
The batteries (2x AAA) must be
inserted into the remote control in
preparation. To do so, pull off the
flap of the battery compartment
and insert the batteries according
to their polarity (see marks).
The indoor unit is easily operated using the standard infrared remote control. The indoor unit beeps to
acknowledge the correct transmission of data. If it is not possible to program the indoor unit using the remote
control, it can also be operated manually.
Immediately replace flat
batteries with a new set,
otherwise there is a risk of
leakage. It is recommended that
the batteries are removed if the
equipment is shut down for
long periods.
NOTE
Manual mode
The indoor units can be started
manually.
Press the RESET key on the receiver
unit of the cover to activate
automatic mode. In manual mode,
the following settings apply:
Cooling mode: 24 °C,
Fan speed AUTO
Heating mode: 26 °C,
Fan speed AUTO
Pressing any key on the infra-red
remote control
interrupts manual mode.
Display on indoor unit
The LED indicators light up to indicate the settings.
Faults are indicated
in code form
(see chapter “Troubleshooting
and customer service”).
!
CAUTION
Display on the indoor unit
Unit for receiving signals
from the remote control
Manual mode
Operation indicator
Alarm indicator
Timer indicator
Defrost fan
Max. 6 m
Maximum distance
Help save on energy consump-
tion in stand-by mode! If the
device, system or component
is not in use, we recommend
disconnecting the power sup-
ply. Components with a safety
function is excluded from our
recommendation!
TIP
REMKO RXT...DC
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RXT1401 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RXT1401 DC in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RXT1401 DC

REMKO RXT1401 DC User Manual - German - 56 pages

REMKO RXT1401 DC User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info