587572
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
5. Unscrew the fastening clamp of the connecting line.
See Fig. 13.
6. Press on the lug on the side of the connector and
remove the connector from the socket.
7. Remove the upper part of the holder by unscrewing
the two screws.
8. Pull the water tube out.
9. Unscrew the left cap nut with the wrench supplied
SW 24.
Make sure to apply counter-pressure on the lower
coupling with the second wrench SW 21 (Fig 14).
Never turn the inflexible lower part!
10. Keep turning until the connection is detached.
Should refrigerant leak out with a slight hissing
noise, keep turning the screws.
8. Clean the dust filter and the plastic surfaces.
9. Hang the outdoor unit onto the indoor unit.
10. Protect the unit from dust with a plastic tarp.
11. Store the unit in a cool, dry place that is protected
from sunlight.
Fig. 12
Screws
Cover
Fig. 13
Connecting line
Fastening clamp
Connector
Water tube
Holder
11. Unscrew the right cap nut with the wrench supplied
SW 24.
Make sure to apply counter-pressure on the upper
coupling with the second wrench SW 21 (Fig. 15).
Never turn the inflexible upper part!
12. Keep turning until the connection is detached.
Should refrigerant leak out with a slight hissing
noise, keep turning the screw.
During the entire process, the unit must be unplugged
from the power source! It may only be put back into op-
eration wants all connections have been re-established
and tested. The fasteners and all covers must be reat-
tached prior to operation.
You must proceed as follows:
1. Switch the unit off.
2. Unplug the unit from the power supply.
3. Remove the 2 screws on the cover on the back of
the unit (Fig. 12).
4. Remove the cover from the unit.
Detaching the
Connecting Line
The connection line is connecting to the indoor unit by
quick-release fasteners. These make it possible to de-
tach the connecting line from the indoor unit for assem-
bly purposes without any coolant draining out.
Fig. 14
loosen
tighten
*
It is possible that any remaining water will come
out of the water tube.
*
To safely detach the connecting line, make sure to
observe the following instructions.
Apply counter-
pressure
loosen
tighten
Fig. 15
Apply counter-
pressure
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RKL470 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RKL470 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RKL470

REMKO RKL470 User Manual - German - 16 pages

REMKO RKL470 User Manual - German - 16 pages

REMKO RKL470 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info