587907
4
Zoom out
Zoom in
Previous page
1/44
Next page
4
REMKO GPM
Safety information
The units were subjected to
extensive material, function and
quality inspections and tests prior
to delivery. However, the units
may constitute a hazard if used by
untrained personnel, improperly or
not for the intended purpose.
The following information must be
observed:
The units must only be
operated by persons who have
been instructed in the operation
of the units
In the event of faults that affect
safe operation of the units, they
must be switched off
The units must be installed and
operated so that the discharging
hot air has no damaging
effects on the environment or
equipment
Do not expose the units to the
effects of weather (rain, sun,
etc.)
Do not touch the units with
moist or wet parts of the body,
e.g. hands
Protect the units from splashing
water or other liquids
Do not use gas pipes for
grounding electrical equipment
Do not touch hot parts of the
units such as the chimney pipe
Do not moving parts of the units
The units must always be operated in compliance with the applicable
local building and fire protection regulations and regulations of the
employers‘ liability insurance associations.
Never insert foreign objects in
the units
The units must only be mounted
on constructions or ceilings
of flame retardant materials
designed to take the weight
The units must only be fastened
at the points provided at the
factory
The units must not be installed
and operated in locations
exposed to fire hazards
and potentially explosive
atmospheres
The units must be installed
outside traffic zones, e.g. of
cranes. A protective zone of 1 m
distance must be maintained
The air inlets including grilles
must be kept free of dirt and
loose objects at all times
The units must not be exposed
to a direct jet of water
The units must be tested at least
once a year by a specialist
Safety devices must not be
overridden or blocked!
Before carrying out
maintenance or repairs, the gas
supply must be shut-off and the
unit disconnected in all poles
from the mains supply.
(Unscrew fuse or switch off
local main/emergency switch)
Precautions if there is a smell
of gas
1. Immediately switch off the unit.
2. Close the gas shut-off valve(s).
3. Warn all persons potentially at
risk.
4. Open windows and doors.
5. Do not operate electrical
devices such as light switches or
electrical plug contacts.
6. If the room in which there is a
smell of gas cannot be entered,
immediately call the fire brigade,
police and if necessary the
responsible gas supply company.
The units are intended
exclusively for industrial and
commercial use. They are not
intended for domestic heating
or similar.
.
NOTE
ATTENTION
Installation, adjustments and
maintenance must only be
carried out by authorised
specialists.
The safety devices must not be
overridden or blocked during
operation.
ATTENTION
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO GPM 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO GPM 35 in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO GPM 35

REMKO GPM 35 User Manual - German - 44 pages

REMKO GPM 35 User Manual - Dutch - 44 pages

REMKO GPM 35 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info