Manual REMKO BL351 (page 4 of 32) (English)

587583

Zoom out

Zoom in

1/32

Safety notes

Disposing of the units and

their components

Only recyclable materials are used

in the manufacture of the units

and components.

Help protect the environment

by ensuring that the units or

components (for example

batteries) are not disposed of

in household waste, but only in

accordance with local regulations

and in an environmentally safe

manner, e.g. using authorised

disposal and recycling

specialists or council

collection points.

Intended use

Depending on the model, the

units and the additional fittings

with which they are equipped are

only intended for private use as

an air-conditioner for the purpose

of cooling or heating the air in an

enclosed space.

Any different or additional use shall

be classed as non-intended use.

The manufacturer/supplier assumes

no liability for damages arising from

such use. The user bears the sole

risk in such cases.

Intended use also includes

working in accordance with the

operating manual and installation

instructions and complying with the

maintenance requirements.

Carefully read this operating

manual before starting the unit

for the first time. It contains

useful tips and notes as well as

hazard warnings to prevent injury

or material damage

. Failure

to follow the directions in this

manual not only presents a danger

to people, the environment and

the system itself, but will void any

claims for liability.

■ Keep this operating manual and

the refrigerant data sheet near

to the unit.

■ The units and components

should be set up and installed

only by qualified personnel.

■ The set-up, connection,

and operation of the unit and its

components must take place in

accordance with the operating

conditions stipulated in this

manual and comply with all

applicable local regulations.

■ Mobile units must be set up

securely on suitable surfaces and

in an upright position. Stationary

units must be permanently

installed for operation.

■ Modification of units and

components supplied by

REMKO is not permitted and

can cause malfunctions.

■ Units and components may

not be operated in areas where

there is an increased risk of

damage. Observe the minimum

clearances.

■ The electrical supply is to be

adapted to the requirements

of the units.

■ The operational safety of

the units and components

is only assured if they are

fully assembled and used as

intended. Safety devices may

not be modified or bypassed.

■ Do not operate units or

components with obvious

defects or signs of damage.

■ All housing parts and openings

in the unit, e.g. air intakes and

outlets, must be free of foreign

objects, fluids, or gases.

■ The units and components must

be kept at an adequate distance

from flammable, explosive,

combustible, abrasive and dirty

areas or atmospheres.

■ Contact with some parts of the

unit or components can result in

burns or other injuries.

■ Installation, repair and

maintenance work may be

carried out by authorised

specialists only. Visual

inspections and cleaning can

be performed by the operator as

long as power is disconnected

from the equipment.

■ To preclude any danger from the

unit, take appropriate hazard-

prevention measures when

performing installation, repair or

maintenance work or cleaning

the unit.

■ The units and components

should not be exposed to any

mechanical load, extreme levels

of humidity or direct exposure

to sunlight.

Warranty

In order to make warranty claims, it

is essential that the ordering party

or their representative complete

and return the "certificate of

warranty" to REMKO GmbH

& Co. KG at the time when the

equipment is purchased and

commissioned.

The warranty conditions are

detailed in the "General business

and delivery conditions".

Furthermore, only the parties to

a contract can conclude special

agreements beyond these

conditions. In this case, first contact

your contractual partner.

Disposing of packaging

All products are carefully packaged

using environmentally friendly

materials prior to transportation.

You can make a valuable

contribution to reducing waste

and sustaining raw materials by

only disposing of packaging at

approved collection points.

Environmental

protection

and recycling

REMKO BL

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of REMKO BL351 in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO BL351

REMKO BL351 User Manual - German - 28 pages

REMKO BL351 User Manual - German - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

REMKO BL351 Manual

Product: