587576
7
Zoom out
Zoom in
Previous page
1/32
Next page
“ (SWING) button
This button directly activates
the oscillating function of the
fins for better air distribution in
the room.
„TIMER“ button
With this button, the automatic
turn on or turn off time of
the unit is activated and
programmed with buttons
and at intervals of 10
minutes.
button
This button increases the
value for time and timer
programming.
button
This button reduces the
value for time and timer
programming.
„SET“ button
Pressing this button activates
the previously set timer.
„OFF button
When this button is pressed, a
shut off timer of 1/2, 1, 2 or 5
hours is activated.
„TURBO“ button
By pressing this button, the
maximum fan stage is activated
for 30 minutes.
„CLOCK“ button
By pressing this button, the
time setting is activated.
„DISP“ button
By pressing this button, the
current temperature on the
remote control is transmitted to
the unit in the I-Feel function.
„ION“ button
By pressing this button, the ion
generator is turned on.
2. Cooling mode
In this mode, the cold air in the
room is cooled down to the
desired temperature.
3. Heating mode
In this mode, the warm air in
the room is warmed up to the
desired temperature.
4
. Air circulation mode
In this mode, the air in the room
is recirculated.
5
. Dehumidification mode
In this mode, the room is mainly
dehumidified, the adjusted
temperature is retained.
„FAN“ button
With this button, the desired
fan speed can be set. 4 stages
are available: Automatic, high,
medium and low fan stage.
„I FEEL“ button
With this button, the sensing of
the room temperature is moved
from the interior unit to the
remote control.
The temperature measured
on the remote control is then
transmitted to the interior unit
in certain intervals.
“ (SLEEP) button
After pressing this button, the
Sleep mode is activated and
in cooling operation, the
nominal temperature increases
automatically by 1 °C within an
hour, in heating operation, the
nominal temperature is lowered
by 1 °C within an hour. After
the 2. hour, the temperature
increases / decreases by 2°C.
After 6 hours, the function is
turned off.
Buttons of remote control
B
uttons of remote control
„ON/OFF“ button
Press this button to operate the
unit.
button
With this button, the desired
temperature can be decreased
up to 16 °C.
button
With this button, the desired
temperature can be increased
up to 30 °C.
„MODE“ button
With this button, the operating
mode is selected. The interior
unit has 5 modes:
1. Automatic mode
In this mode, the unit works in
cooling or in heating mode.
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ATY260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ATY260 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ATY260

REMKO ATY260 Additional guide - German - 1 pages

REMKO ATY260 User Manual - German - 32 pages

REMKO ATY260 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info