490487

Remington R8150 Manual

6
Zoom out
Zoom in
Previous page
1/8
Next page
4
ENGLISH
CLEANING DAILY
Ensure the shaver is switched off and unplugged from the mains.
Open the shaver head by pressing the release button on the front of the shaver (Fig. I) and
flipping open the head away from the body of the shaver (Fig. J).
Rinse the shaver head with warm water (Fig. K).
Close head assembly (Fig. L).
CLEANING WEEKLY
Perform the daily cleaning steps first.
Replace inner cutter (Fig. ).
CAUTION:
Never submerge your shaver in water. The shaver can be rinsed with water. The water
temperature should not exceed 70 degrees. Attention. Unplug the shaver before cleaning with
water. Keep the adaptor and cable dry.
CLEANING TRIMMER
Lubricate the teeth of the trimmer every six months with one drop of sewing machine oil.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE,
OR INJURY TO PERSONS:
An appliance should never be left unattended when plugged in to a power outlet, except
when charging. Keep the power adaptor and cord away from heated surfaces.
Make sure the power adaptor and cord do not get wet.
Do not plug or unplug the shaver with wet hands.
Do not use the product with a damaged cord. A replacement can be obtained via the
Remington
®
Service Center.
Charge, use and store the product at a temperature between 15°C and 35°C.
ENGLISH
090249_REM_IFU R4130-7130_22L.indd GB_4090249_REM_IFU R4130-7130_22L.indd GB_4 04.03.2009 22:37:57 Uhr04.03.2009 22:37:57 Uhr
Open the shaver head by pressing the release button on the front of the shaver (Fig. I)
and flipping open the head away from the body of the shaver (Fig. J).
Release the inner cutter carrier by rotating the locking arms counter-clockwise (Fig. M)
Pull the inner cutter carrier away from the inner cutters (Fig. N).
Thoroughly brush hairs from the inner and outer cutters (Fig. P) and rinse out remaining debris .
Place the inner cutter carrier back onto the upper hairpocket and lock in place by rotating
the locking arms clockwise until the arms ‘click’ into place (Fig. Q - R)
O
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington R8150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington R8150 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info