616875
8
Zoom out
Zoom in
Previous page
1/8
Next page
Alternatively, you may choose to remove the batteries yourself:
To avoid a possible electric shock hazard, unplug cord (if used) from electrical outlet and shaver.
Run the shaver until the motor stops.
Remove head assembly by first pressing the two side buttons. (Fig. K)
Un-clip the top metal bracket by prying the lower back edge over the snap. Lift the lip of the rubber boot off the
housing. (Fig. L)
Pry off the front panel. (Fig. M)
Remove the two screws securing the cord opening. (Fig. N)
Squeeze the front housing and pull the back off to expose the PCB and batteries. (Fig. O)
Pry the PCB assembly out of the shaver housing (Fig. P)
Cut or break the wire straps on both ends of the batteries, pry the batteries from the foam adhesive tape on the
PCB. (Fig. Q)
Dispose of batteries with extreme care.
SERVICE AND WARRANTY
This product has been checked and is free of defects. We warrant this product against any defects that are due to
faulty material or workmanship for a 2 year period from the original date of consumer purchase. If the product
should become defective within the warranty period, we will repair any such defect or elect to replace the
product or any part of it without charge provided there is proof of purchase. This does not mean an extension of
the warranty period.
In the case of a warranty simply call the Remington
®
Service Center.
This warranty is offered over and above your normal statutory rights.
The warranty shall apply in all countries in which our product was sold via an authorised dealer.
This warranty does not include shaving heads / foils and cutters which are consumable parts. Also not covered
is damage to the product by accident or misuse, abuse, alteration to the product or use inconsistent with the
technical and/or safety instructions required. This warranty shall not apply if the product has been dismantled or
repaired by a person not authorised by us.
ENGLISH
6
080086_REM_IFU_MS2291-2391 _UK.indd gb6080086_REM_IFU_MS2291-2391 _UK.indd gb6 26.02.2008 15:48:55 Uhr26.02.2008 15:48:55 Uhr
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington MS5120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington MS5120 in the language / languages: English as an attachment in your email.

The manual is 5,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info