Manual Remington MB4030 (page 3 of 69) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish)

490476

Zoom out

Zoom in

1/69

4 5

ENGLISHENGLISH

FHOW TO USE

,Before you begin

• Alwayscombyourbeardormoustachewithanecombbeforeyoustarttrimming

,Adjusting the trim length

• Thetrimmercombcanbeadjustedtogiveyou9dierenttrimlengthssimplybyturning

the wheel to the desired setting.

• Turnthewheelclockwiseforshorterlength,anti-clockwiseforlongerlength.

• Thewheelwillclickintoplaceasitreacheseachsetting,andthesettingnumberwill

appear on the length position indicator.

SETTING HAIR DESCRIPTION HAIR LENGTH

Stubble or Cropped look

1.5mm

0.06’’

2.5mm

0.1’’

Short

4mm

0.16’’

5.5mm 0.22’’

Medium

7mm

0.28’’

6 9mm

0.35’’

7 11mm

0.43’’

8 14mm

0.55’’

Long

18mm

0.71’’

,0.5 – 5.5mm guide comb

The0.5–5.5mmguidecombcanbeadjustedtogiveyousettingsof0.2mmadjustment

simply by turning the wheel to the desired setting. Turn the wheel clockwise for longer

length and anticlockwise for shorter length.

The setting will appear on the length position indicator.

,Attaching and removing the 0.5 – 5.5mm guide comb.

With the trimmer blade facing away from you, slide the guide comb on top of the trimmer

blade and click into position.

With the trimmer blade facing away from you, carefully push the guide comb away from the

trimmer blade.

Note: Trimmer comb must be attached to the product in order to use the hair length

selector.

,To thin and taper beards/ moustaches

• Attachanattachmentcombtothe30mmTrimmerBlade.

• Usethezoomwheeltosetthetrimmercombtothedesiredlengthsetting.Thesetting

willappearonthelengthpositionindicator.Ifyouaretrimmingforthersttimestart

with the maximum trimming length setting

• Turntheuniton.

• Placetheattopofthetrimmercomb against the skin

• Slowlyslidethetrimmerthroughthehair.Repeatfromdierentdirectionsasnecessary.

• Ifhairbuildsupinthetrimmercombduringthetrimmingprocess,switchtheunito,

pull o the comb and brush/rinse o

,To dene the beard/moustache line

• Hold trimmer with 30mm Trimmer Blade facing you.

• Removethetrimmercombattachment

• Startwithedgeofbeard/moustachelineandgentlylowerthetrimmerbladeontoyour

skin.Usemotionstowardsedgeofbeard/moustachelinetotrimtodesiredlocationsin

facial area and away from beard in neck area.

• Fornershaping,raisethepop-uptrimmer.Shapeasdesired.

C BLADE RELEASE

• Removetheadjustablecomb.

• Pushthereleasebuttononthebackoftheproduct.

• Bladewillreleaseitselffromitshousing.

• Removethebladefromthehousing.

• Toreplacetheblade,makesurethebladeisalignedandthegroovesontheblade

cartridge match up with slots in the housings.

• Pushthebladeintothehousinguntilitsnapsintoplace.

C REPLACING THE TRIMMER COMB

• Holdthetrimmerinonehandwithyourthumbrmlyonthezoomwheeltokeepitfrom

turning. Ensure that the length position indicator is at 1.

• Slidethecomb/shaverdownthegroovesuntilitclicksintoplace.

Note: The trimmer comb attachment can only be placed on the trimmer one way; if it

doesnottproperlyremoveandreverseit.

ETips for best results

• Beard,moustacheandsideburnhairsshouldbedry.

• Avoidusinglotionsbeforeusingyourtrimmer.Combyourhairinthedirectionthatit

grows.

• Removetrimmercombattachmentifyouare:deninghairlineedgessuchassideburns,

trimming the nape of your neck, trimming your beard line on front of neck.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remington MB4030 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remington MB4030 Manual

Product: