Manual Reloop CONTOUR Interface Edition (page 34 of 64) (English, German, French)

490508

Zoom out

Zoom in

1/64





T16 

By turning the encoder a set loop can

be shifted.

Simultaneously pressing and tur-

ning the encoder determines the

movement‘s range.



Allows the temporary acceleration (clockwise)

or deceleration (counterclockwise) of a track.

T17 

Regulates the lter effect for the active

deck. In the zero position the lter will

be deactivated automatically.



Via the Cue Mix Fader a pre-mix can be simula-

ted in your headphones. When to the right the

master signal is audible, when to the left the

cue signal is audible.

T18 

Herewith you can adjust the volume

division for the left and right channel.

The zero position corresponds to an

equal level on both channels.



Adjusts the master volume.

T19 

Sets an automatic loop with the adjus-

ted loop length (-T15-), without having

to manually set the ending point.



Manually sets the starting point of a loop.

Simultaneously a cue point will be set.

T20 

Jumps to the last set loop and reacti-

vates it.



Manually sets the ending point of a loop.

Now the deck is in a loop mode, the selected

sequence is permanentely repeated.

Pressing the button again will end the loop

mode.

T21 

Carries out a beat jump against oppo-

sed to the playback direction.



Shifts the grid that Traktor puts over the bass

line a step to the left.

T22 

Carries out a beat jump in the playback

direction.



Shifts the grid that Traktor puts over the bass

line a step to the right.

T23 

Selects the desired hot cue bank. If

„1-4“ is pressed, the hot cue points 1-4

can be controlled in Traktor. Shortly

pressing „5-8“ facilitates the control of

hot cues 5-8 via the Hot Cue Buttons

-T24-.

T24 

Herewith it is possible to control the 8

hot cues of a track in Traktor. Depen-

ding on which bank is currently active

hot cues 1-4 and 5-8 respectively can

be controlled.

If a hot cue is not occupied (no LED

feedback), this hot cue will be assigned

to the current track position by pres-

sing one of the pads.

T25 

If this element is pressed, the current

track position is saved on a free hot

cue.

T26 

While this button is being pressed and

held the saved hot cue points can be

deleted by pressing the corresponding

hot cue pads -T24-. The LED of the

corresponding pad will go out.

Afterwards release the Delete Button in

order to leave delete mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Reloop CONTOUR Interface Edition in the language / languages: English, German, French as an attachment in your email.

The manual is 20,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Reloop CONTOUR Interface Edition Manual

Product: