413707
16
Zoom out
Zoom in
Previous page
1/18
Next page
REL R-Series Owner’s Manual 17
This is a necessarily simplified description of what actually happens, but in effect,
Set-Safe controls the amplifier and ensures there is minimum risk of amplifier and
driver damage caused by over-driving.
A thermal overload device is fitted to all R-Series Sub-Bass Systems. If the unit is
deliberately overdriven this device will sense the temperature rise and cut the output;
recovery time is approximately five minutes. If this happens, it is a warning that the unit
is being overdriven and the volume level control should be reduced to a safe level.
Although everything possible has been done to minimize risk of thermal overload failure,
there can be no defense against those individuals who deliberately abuse the device.
Such damage is NOT covered by Warranty. Please remember your REL is there to
supplement your main system, not overwhelm it!
PowerSaving Efficiency
All REL Sub-Bass Systems are designed for maximum power efficiency, both when
passing a signal through to its resultant output sound into the room and also when silent.
REL circuitry is designed for “power starvation” operation under no signal conditions.
This means that immediately when there is a gap in the signal the REL is instantly at
maximum power saving efficiency, yet remains at maximum readiness to respond
immediately to a sudden transient signal, such as an explosion in a movie, even after
a long quiet period and regardless of level.
This compares to some “auto power on/off systems” which remain powered up for a
set period of no-signal condition (up to 10-15 minutes) and which need to power-up
on receipt of a sudden transient, thus failing to catch the start of that transient. There
is also the possibility of the unit remaining inoperative during listening sessions where
the overall volume is low.
It is not necessary to switch off between listening sessions – it will not significantly
shorten its life by leaving it switched on. On the other hand, it will not harm sound
quality if it is always switched off. The power consumption in the quiescent (no signal)
state is negligible. RELs power starvation technology uses less than 4w when idle
(less than 1/25th the power of a standard light bulb).
It is perfectly safe under all normal domestic circumstances as it is fully protected by
internal fuses and an external mains fuse in the fuse holder of the mains input socket,
with a spare inside this holder.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rel r-205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rel r-205 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rel r-205

Rel r-205 User Manual - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info