Manual Reflexion CARSAT 55 (page 29 of 44) (English, German)

755544

Zoom out

Zoom in

1/44

2. Additional assembly with adhesive.

a) Transfer the outline of the mounting plate to the vehicle roof when it

is screwed on.

b) After loosening the screws, clean the marked area and the mounting

plate.

c) Roughen the surface slightly and apply the assembly adhesive evenly.

d) Press the system evenly onto the mounting surface.

e) Then screw the antenna back on.

f) Note the drying time of the adhesive used.

g) Use commercially available body sealant to seal the mounting

screws.

h) Remove excess adhesive residue.

INSTALLATION ON THE ROOF

3. Assembly of the cable entry

a) Transfer the outline of the cable entry to the vehicle roof.

b) Drill the corresponding holes for cable entry into the vehicle interior.

c) Seal the cable entry.

d) Glue the cable bushing to the vehicle roof using a suitable mounting

adhesive.

e) Note the drying time of the adhesive used.

f) Remove excess adhesive residue.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Reflexion CARSAT 55 in the language / languages: English, German as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Reflexion CARSAT 55 Manual

Product: