693169
1
Zoom out
Zoom in
Previous page
1/2
Next page
ENG
LISH
UK 016 03 710339
US 877-928-7333
FR 0811 850 11 3
DE 0800-181-9091
info@reef-one.com
www.reef-one.com
3
0
L
/
8
U
S
G
a
l
s
=
3
6
K
g
/
8
0
l
b
s
3
5
L
/
9
U
S
G
a
l
s
=
4
0
K
g
/
8
8
l
b
s
6
0
L
/
1
6
U
S
G
a
l
s
=
7
2
K
g
/
1
6
0
l
b
s
This guide will help you understand how
your aquarium works and how to create a
healthy environment for your fish. Please
read these instructions carefully before
filling your aquarium with water.
This is not a toy, adult supervision is
recommended. Removing the serial
number or dismantling your aquarium
will invalidate your guarantee.
L
L
L
L
DO NOT MOVE
WHEN FULL
5
1
2
3
4
6
1. Carefully remove contents from the
box and check. Choose a suitable
location for your aquarium noting all
the advice above and place your
aquarium on a strong and level
surface. Remember the aquarium
needs a power source within reach.
2. Remove plastic wrapper from filter
cartridge (A) then offer up cartridge to
base of bubble tube (B), locate tabs
and twist in a counterclockwise
direction ensuring all cartridge tabs are
fully located. New cartridges are
available from a biOrb dealer.
3. Remove the light unit and lid from
the biOrb then take the bubble tube
and filter cartridge assembled in step 2
and insert into the biOrb. Turn the bubble
tube clockwise until it locks in position.
When correctly located, the bubble tube
and filter will remain in place.
4. Wash the ceramic media supplied
thoroughly before placing around the
filter body, ensuring none remains on top.
Use only ceramic media supplied, do not
use aquarium gravel. Discard any pieces
smaller than a pea.
5. Connect the airline to the pump as
shown and place in a suitable position.
Positioning the pump higher than the
aquarium water level will prevent water
leakage or damage to pump should
valve failure occur.
Setting up your aquarium
6. Plug the pump and light unit plug into
the separate sockets on the transformer
supplied, then plug the transformer into
the power source and turn on. The pump
should be left running 24hrs a day, only
switch it off during filter cartridge
changes and cleaning.
7. Fill the aquarium with tap water to
approximately 3”/7.5cm above the top
of the bubble tube and add Water
Conditioner. Leave the aquarium
running for at least 24 hours before
adding Biological Booster and then you
will be ready to add your first fish. Do
not immerse the light unit in water.
D
O
N
O
T
P
L
A
C
E
O
N
O
R
N
E
A
R
E
L
E
C
T
R
I
C
A
L
I
T
E
M
S
AVOID
HOT AREAS
AVOID
SUNLIGHT
7
3’’- 7.5cm
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reef One Biorb Biube at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reef One Biorb Biube in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info